JBL AWC62 All-Weather 2-Way 6.5" Coaxial Passive Loudspeaker

The AWC62 is a compact, coaxial-driver, 2-way, highly weather-resistant full-range loudspeaker system which is ideal for speech and music-fill in a wide variety of applications, including sports facilities, racetracks, stadiums, fairgrounds, rodeos, skating rinks, themed entertainment venues, cruise ships, water parks, outdoor background music/paging systems, swimming pools, and a wide variety of other outdoor or indoor venue types. Includes: AWC62 6.5 Compact 2-Way Coaxial Loudspeaker (Black) - U Bracket - JBL 5 Year Limited Warranty Features: Highly weather-resistant IP56 rating Consistent 110 Degree x 110 Degree broadband pattern control Components: 165 mm (6.5 ) woofer with Kevlar-reinforced cone and 38 mm (1.5 ) voice coil & 25 mm (1 ) exit compression driver Extraordinary clarity for speech, with extended frequency response for music Advanced high-slope crossover network for constant coverage and smooth, natural midrange 175 Watt power handling (average continuous pink noise) with high sensitivity provides high SPL capability High-power passive crossover network Overload protection 70 Hz - 18 kHz frequency response 120 Watt 70V/100V multi-tap (built-in transformer) or direct 8 Ohm low-impedance Specifications: Finish: Black Frequency Range (-10 dB): 70 Hz - 18 kHz Frequency Response (+/-3 dB): 100 Hz - 16 kHz Coverage Pattern: 110 Degree x 110 Degree Directivity Factor: 7.2 (1 k - 16 kHz) Directivity Index (DI): 7.9 dB (1 k - 16 kHz) Long-Term System Power Rating (IEC): 175 W 2 hrs 120 W 100 hrs Sensitivity (2.83V @ 1m): 92 dB (Ave. 100 Hz - 18 kHz) Maximum SPL: Direct 8 Ohm: 114 dB (peaks of 120 dB) 120 W Tap: 112 dB Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 3rd order low-pass to LF Nominal Impedance: 8 ohms Transformer Taps: 70V: 120W, 60W, 30W, 15W 100V: 120W, 60W, 30W Low Frequency Driver: Kevlar-reinforced cone with weather treatment, 38 mm (1.5 ) voice coil. High Frequency Driver: 25 mm (1 ) diaphragm and voice coil diameter HF Driver Protection: Minimum audibility SonicGuard HF overload protection Enclosure Material: ABS with Glass enclosure Attachment: Two M10 (fine-thread) points for included U-bracket. M6 secondary safety attachment point on back panel. Grille: Corrosion-resistant zinc-rich extra-thick powder coated steel grille, 3-layer assembly with foam and woven poly mesh backing. Input Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept up to 8 mm outside 4 mm inside open-lug (#6 or #8) plus bare wire up to 2.5 mm2 (12 AWG) wire or spade lugs. Terminal compartment cover equipped with gland nut that forms water-tight seal with round- jacketed cables with outside diameters between 4.0 mm (0.16 ) and 9.0 mm (0.36 ). Environmental: IP56 per IEC529, with a minimum 5 Degree downward aiming angle. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV, and ASTM G85 for salt spray (168 hrs). Dimensions: Cabinet: 10.2 x 10.2 x 10.1 (259 x 259 x 255mm) Including gland nut: 11.4 (288mm) Including bracket extending to back: 12.2 (309mm) Weight: 15 lb (6.8kg) with U-bracket: 17 lb (7.7kg)