JBL 306P MkII 2-Way 6.5" Active Nearfield Studio Monitor (Single)

The JBL 306PMKII is a powered studio monitor with 6-inch woofer. This bi-amplified studio monitor with magnetically-shielded 6” Low Frequency Transducer and 1” Soft-Dome High Frequency Transducer and Image Control Wave Guide. Class-D 56 Watt RMS Amplifier for LF, and 56 Watt RMS Amplifier for HF. Balanced XLR and 1/4 Inputs with Dented Level Control, New LF Boundary Control; HF Trim Controls.

The dimensions and acoustics of a room can have a major effect on sonic accuracy, and that’s why JBL 306P MkII lets you adjust the response to fit your studio. The new Boundary EQ attenuates the low-end boost that can occur when you place monitors directly on the desktop or near walls. The 3-position HF Trim switch allows you to adjust the high-frequency response of the 306P MkII to tailor it to room acoustics or personal tastes.

JBL 306P MkII is ready for the most demanding production styles right out of the box. With 112 watts of total power, the dual, integrated Class-D power amplifiers, custom designed by JBL for each transducer, give you generous dynamic range for any project. From music production and podcasting to cinematic sound design or daily vlogging, enjoy the output and power you need to hear exceptional detail at any volume— even at peak SPL. Simply plug in, power on, and start creating.

Features

• Patented Image Control Waveguide
• Broad sweet spot
• Low frequency transducers
• HF transducer
• Boundary EQ

Specifications

• LF Driver Size: 165mm (6.5")
• HF Driver Size: 25mm (1")
• HF Driver Type: Soft dome
• Crossover: 1425Hz 4th order acoustic Linkwitz-Riley
• Input Sensitivity: (-10dBV INPUT): 92dB / 1m
• Power Configuration: Bi-amplified
• HF Driver Power Amp: 56W, Class-D
• LF Driver Power Amp: 56W, Class-D
• Frequency Response: (±3dB): 47Hz – 20kHz
• Frequency Range: (-10dB): 39Hz – 24kHz
• Low Frequency Extension: (-10dB): 39Hz
• Maximum Continuous SPL: 92dB
• Maximum Peak SPL: 110dB
• Maximum Peak Input Level: (-10dBV / +4dBu): +6dBV / +20.3dBu
• System Distortion Criteria
• Electrical Distortion Criteria: 0.2% THD @ 1kHz / 2.83VRMS output;
• Signal to Noise Ratio: 75dBA (A-Weighted), 70dBr (unweighted), relative to 2.83VRMS output
• Coverage (Horizontal x Vertical): 120° x 90°
• Analog Input Types: 1 x XLR female, 1 x TRS female, balanced
• HF Trim Control: -2dB, 0dB, +2dB
• Boundary EQ: LF Shelf @ 50Hz: -3dB, -1.5dB, 0dB
• AC Input Voltage: 100 – 240VAC (±10%), 50 / 60Hz
• Enclosure Type: Ported
• Enclosure Construction: 15mm MDF
• Enclosure Finish: Matte black PVC
• Baffle Construction: Injection-molded structural ABS
• Dimensions(H x W x D): 361 x 224 x 282mm (14.2" x 8.8" x 11.1")
• Weight: 6.1 kg (13.42 lbs)