Irmo, SC, United States
About this listing
The Phoenix Audio Ascent Two Preamp provides two channels of Phoenix's high fidelity preamps, with the rich character of their custom output transformer - making a perfect solution for stereo recording of acoustic stringed instruments, guitars, and drums overheads.
The Phoenix Audio Ascent Two Preamp is their take a modern approach to Class-A circuit design that delivers a wide range of tones without sacrificing the beloved vibe of true Class-A design. The unique Ascent circuit can go from ultra-clean sounds suitable for audiophile recordings all the way to the warm, saturated tones reminiscent of the UK's most heralded vintage designs. Versatility and superior sound have made the Ascent Preamp/DI a top-tier choice for engineers around the world and a modern day classic. The custom-wound DB694 output transformer is coupled to Phoenix's proprietary, fully discrete DSOP-2 output amplifier. The DSOP-2 is a direct descendent of the venerable TF1 amp which Phoenix's head-designer, David Rees, developed as an upgrade for vintage Neve modules. Going beyond the TF1, the DSOP2 is the pinnacle of Class-A output circuit design, offering up a smooth transition from ultra-clean to beautifully saturated tones.
Phoenix Audio Ascent Two Preamp Features
Phoenix Audio's unique Class A, transformerless, true-balanced mic input stage
Phoenix Audio's transformer-balanced DSOP-2 Class-A discrete output stage with custom wound DB694 output transformer
Wired with PTFE silver plated military grade cable
-15dB input pad
LED Gain Metering
Push buttons: Hi-Pass, Phase Reverse, Switchable 48V phantom power on push-button switch
High Pass Filter on Push-button Switch (Roll-off -12dB per octave @ 80Hz)
Phase Reverse on Push-Button Switch
Mic Pre Gain Range: -30 to -70 in 5dB steps With 10dB more available on the detented ouput fader.
Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.
Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency response Class A (DSOP-2) output stage: 20Hz to 20kHz +- 0.5dB, Maximum
Phoenix Audio Ascent Two Preamp Specifications
1U half rack space unit: With 240V/110V mains voltage input selector switch (optional 19" rack kit)
Class A (DSOP2) Output specs. Frequency response: 20Hz to 20kHz +- 0.5dB, Maximum Output = +26dBu @ 1kHz, Noise = -90dB @ 20Hz to 20kHz.
Output connections: XLR’s and TRS 1/4″ Jack on rear
Phoenix Audio’s unique Class A, transformerless, True balanced Mic input stage. Microphone inputs: XLR’s on Front and Rear Panels
10K mic impedance for high quality performance with all mic particualry ribbons mics & dynamic mics
Transformer-balanced Output on each channel: Driven by the Phoenix Audio Class A DSOP-2 fully discrete output stage, each transformer is custom wound.
Individual Earth Lift: Push-button Switches
Gain Range (Mic input): -30 to -70 in 5dB steps With 10dB more available on the fader.
Gain reduction: -15dB push-button pad switch (Mic input only)
High Input Impedance DI: Mono 1/4″ Jack on front panel
Gain Meter: LED Metering. (Green = 0dB, Red= +8dB, corresponding to “4” and “6” on a PPM Meter).
Phantom Power: Switchable phantom on Push-button Switche
High Pass Filter: on Push-button Switch
Vari-filter control 70hz to 400hz on a 21 postion detented control
Phase Reverse: on Push-button Switch
Frequency Response Mic Input Stage: -0.4dB @ 40Hz, -0.3dB @ 25kHz
Frequency Response: DI Input Stage: -0.3dB @ 40Hz, – 0.5dB @ 25kHz
Typical Headroom: +26dB on Mic-Pre stage
DI Stage gain: Maximum of 30dB
All units are wired with PTFE silver plated military grade cable
Phoenix Audio Ascent Two Preamp Includes
Ascent Two Preamp
Power Cable
Manual
Manufacturer Warranty
PriceA$3,319.72
+ A$149.46 Shipping
A$90.56 shipping when combined
14-Day Return Policy
Enjoy peace of mind with your new gear
