FYI - This listing is, indeed, for a Mix-Pre 10ii NOT a XXXMix-Pre 10mXXX like shown in the Reverb product description. Reverb support has been notified to make the change to this listing to prevent confusion, but I assure you (see pix) that this is the 32-bit floating point/192Khz capable device.

-----------------------------------------

Near Mint/lightly-used Sound Devices MixPre-10 II (32bit floating point) that is a little more than I need for my current recording scenarios. Includes some extras, but also includes all original boxes, packing and documentation (not pictured).

This unit has performed flawlessly the few times I have used it. Recently updated to the latest firmware and used with no issues.

Only serious offers will be considered.

Shipping via UPS to USA Lower 48, only. Flat rate shipping costs are listed at the MAX amount and will adjust based on your location. Flat rate shipping costs also include UPS package insurance for the purchase amount at a cost of $34 (reflected in the MAX flat rate shipping costs)

The purchase includes:

• MixPre 10 II unit and all power cables, original boxes and manuals.
• Dual external batteries + dual battery sled + dual battery charger
• 256GB SDHC Card
• AC Adapter
• AA Battery Sled
• LowePro Mixer/Recorder Gear Bag (not pictured)

The MixPre-10 II Recorder is designed with eight crystal-clear, ultra low-noise Kashmir preamps for recording high-quality audio for podcasts, music, and small productions. The second generation of Sound Devices’ award-winning MixPre Series has been redesigned for increased performance with an up to a 32-bit float bit depth,  192 kHz sample rate, and an astounding 142 dB of dynamic range.  

The MixPre-10 II is flexible and highly customizable to your needs. It can record internally to a compatible SD card or directly to a computer over USB.  Power with your computer, wall power, or internally with AA or Sony L-mount batteries.

Limiters, bit depth, sample rates, gain, pan, low-cut, phase inversion, and phantom power are all adjustable. Trigger your camera with the internal time code generator, or feed time code in via HDMI or Aux In.

Basic mode is also available for easy operation if you prefer to deal with fewer options.

The MixPre-10 II is rugged, lightweight, and small, so you can throw it in a bag or mount it to a tripod or camera. The Wingman iOS App and four supported USB control surfaces (Akai MidiMix, Korg NanoKontrol Studio and NanoKontrol 2,  Novation LaunchControl XL) provide more set-up options. 

• Eight ultra-low-noise Kashmir microphone preamps with adjustable limiters capture high quality audio in the field, on set, or with a computer.
• Create a mix using the built-in 10 x 4 portable mixer. Manufacturer Part Number:9833
• Record up to 12 tracks to an SD card and backup to a USB thumb drive.
• 12-in, 4-out USB audio interface streams to your computer via USB-C at bit depths up to 32-bit float.
• Choose bit depths from 16 to 32-bit float, and sampling rates from 44.1 kHz to 192 kHz.
• Internal LTC timecode generator. Timecode In/Out via BNC or Aux In/Stereo Out. 
• Timecode and record triggering via HDMI.
• USB-A for control surfaces, keyboards, and auto-copy to USB drive.
• In-unit ISO mixing, gain, pan, low-cut, phase inversion, and phantom power.
• Sunlight-readable color touch screen and LED metering.
• Lightweight, durable, and small: perfect for bag use, mobile recording, or a home studio.
• Powerful 300 mW+300 mW headphone amp allows clear and accurate reference of audio.
• Includes a MX-8AA Battery Sled (batteries not included), XL-WPH3 AC Power Supply, and USB-C to USB-C cable.

TECH SPECS

Audio Inputs

• Frequency Response
• • 10 Hz to 80 kHz +/- 0.5 dB re 1 kHz @ 192 kHz sample rate
• THD + Noise
• • 0.005% max (@1kHz, 22-22 kHz BW, gain=20 dB, -10 dBu in)
• ADC
• • 32 bit precision; 142 dB dynamic range min (A-weighted, gain=10 dB, fader=0 dB)
• Equivalent Input Noise
• • -130 dBV (-128 dBu) max (A-weighting, gain=76 dB, 150 ohm source impedance)
• Inputs
• • Mic: XLR active-balanced; 4k input
  • Line: XLR active-balanced; 4k input
  • Aux/Mic in: 3.5 mm TRS, 2-channel unbalanced; 2.2k
  • Line: ¼-inch TRS active-balanced; 4k input
  • USB Audio: 4 channels
  • 10 Total analog inputs: 8 mic-line inputs, 2 on Aux In
  • All inputs fully RF-filtered and overload protected.
• Gain
• • Mic input: +6 dB to +76 dB
  • Line input: -20 dB to +30 dB
  • Fader: -inf to +20 dB
  • Headphone: -inf to +20 dB
  • Total, Mic-to-recording (max): +96 dB
  • Aux In (Mic): Gain = +10 dB to +40 dB
  • Aux In (Line): Gain = -10 dB to +20 dB
  • Total Aux Gain including Fader (Mic-to-recording): +60 dB
• Maximum Input Level
• • Mic XLR: +14 dBu (limiters on or off)
  • Line XLR/¼-inch: +28 dBu (limiters on or off)
  • Aux In (Mic): -10 dBu
  • Aux In (Line): +10 dBu
• Low Cut Filters
• • 40 Hz to 160 Hz (adjustable), 18 dB/oct. First stage analog, subsequent stages digital.
• Microphone Powering
• • Mic XLRs: 48 V via 6.8k resistors, 10 mA each
  • Mic 3.5 mm: 3 V @ 3k source
• Limiters
• • Limiter at all gain stages, range > 40 dB. First stage analog, subsequent stages digital. Adjustable Threshold, Ratio, and Release.

Audio Outputs

• DAC feeding Stereo Out, Headphone Out
• • 32 bit precision; 115 dB dynamic range (A-weighted)
• L/R Out
• • TA3 2-channel balanced, 1.1K max output impedance, +18 dBu max output level
• X1/X2 Out
• • 3.5 mm TRS stereo unbalanced, 500 ohm output impedance, +7.8 dBu max output level
• Headphones Out
• • 3.5 mm TRS stereo unbalanced, 300 mW + 300 mW, for use with any impedance headphones

USB

• Audio Interface (USB-C): 12-in/4-out; 44.1 to 96 kHz; 16/24/32-bit integer, 32-bit float; Class-compliant USB 2.0 high speed or ASIO® driver (supplied via download)
• Mass Storage (USB-C): USB 2.0 high speed
• Keyboard (USB-A): Text entry and control
• Thumbdrive (USB-A): Manual or auto-copy to drive
• Midi Control Surface (USB-A)

Recording

• Maximum Record Tracks
• • 12 Tracks: Stereo mix + 10 ISOs
• Sampling Frequency
• • 44.1 kHz
  • 47.952 kHz
  • 48 kHz
  • 48.048 kHz
  • 96 kHz
  • 192 kHz
• Bit Depth
• • 16
  • 24
  • 32 Float
• Recording Storage
• • Type: SD, SDXC, SDHC Card (USB thumbdrive, copy only)
  • Max Storage Size: 512 GB (SDXC)
  • Card format: exFAT
• File Types
• • Polyphonic WAV

Timecode

• Timecode Modes
• • Free Run
  • Time of Day (file stamped w/current ToD)
  • Rec Run
  • Ext LTC (file stamped w/incoming LTC on BNC or Aux 3.5mm)
  • Camera TC (file stamped w/incoming TC from cameras that output TC)
• Timecode Frame Rates
• • Auto-detects (fps):
  • 23.98 (same as 23.976)
  • 24
  • 25
  • 29.97DF
  • 29.97ND
  • 30
  • 30DF
• Sync Source
• • Internal, Word Clock, Ext LTC
• BNC In (TC In)
• • Switchable between Timecode (default) or Word Clock Input
  • Timecode: 20k ohm impedance, 0.3 V – 3.0 V p-p (–17 dBu – +3 dBu)
  • Word Clock: 10k ohm impedance, 1.5 V p-p
• BNC Out (TC Out)
• • Switchable between Timecode (default) or Word Clock Output
  • Timecode: 1k ohm impedance, 3.0 V p-p (+12 dBu)
  • Word Clock: 75 ohm impedance, 5 V p-p
• HDMI
• • TC Reader via HDMI
• Sample/Timecode Accuracy
• • 0.2 ppm (0.5 frames per 24 hours)

Remote Control

• Bluetooth LE: Wireless control using Wingman app
• HDMI (micro): Auto-record start/stop trigger from cameras that output record flag over HDMI
• Timecode: Auto-record start/stop trigger via Aux In timecode

File Delivery to Cloud

• Compatible with Viviana Cloud

Touch Screen

• 320×256; 1.6-inch, color, sunlight-viewable IPS LCD

Power

• AA Batteries: 8x AA sled (included). NiMH recommended
• L-Mount: Optional sled for 2x (hot-swappable) Li-ion batteries
• AC Adapter: XL-WPH3 (included): Universal, 45 W in-line AC-to-DC power supply Hirose 4-pin DC plug, with detachable IEC power cord. 100-240, 50/60 Hz

Environmental

• Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing)
• Storage: -40°C to 85°C

Dimensions (H x W x D)

• 3.6 cm x 20.6 cm x 17.5 cm
• 1.375” x 8.125” x 6.875”

Weight

• 0.91 kg (unpackaged, without batteries)
• 32.1 oz. (unpackaged, without batteries)