Providence Vitalizer DVI-1M Dual Vitalized Routing Interface Effector

Is this pedal in mint condition? Yes, it is. It is pristine!
Does it come with original box and contents? Yes, it does.

NO V E L C R O
NO FINGERPRINT

USPS Domestic shipping options:

• $ 1.95 w/ no signature request
• $ 4.45 w/ Signature request

NO dings - NO chips - No cracks and NO blemishes on it..No finger print!  

Dual Vitalizers: The dual vitalizers minimize changes in signal quality and reduce impedance to a low impedance, preventing changes and degradation of sound quality caused by pedal systems and long cables, and stabilize the signal. The dual vitalizers are provided on two lines, one after the IN input and the other after the RETURN input, allowing the vitalizers to function with any routing set.

The SEND/RETURN jacks are laid out to allow efficient wiring of pedal system (board) inputs and outputs. TUNER OUT (can also be used as a 3-parameter box) Normally, a tuner is connected, but by switching the internal switch, it can also function as a 3-parameter box.

When using a pedal system with SEND/RETURN, mute can be applied at the end of the pedal system to shut out noise and unwanted aftertones generated in the pedal system. The pop noise reduction circuit is used to reduce the noise and unwanted residuals generated in the pedal system.

The mute circuit uses a relay contact circuit that does not change the sound quality. The circuit also reduces pop noise when switching the mute switch. This circuit is designed to prevent the effectors connected to the unit and other external electrical influences, providing a stable low-noise environment. The LED lights blue when the power is on and blinks red when the power is muted to indicate operation.

The THRU junction is a stereophonic (TS) construction, with two signal lines (tip and ring) and a ground line (sleeve) that are completely independent electrically. It can be used for a variety of purposes, from pedal systems to channel control patches on amplifiers and two signal connections to external equipment. The wide-voltage DC input accepts a wide range of AC adapters (center-tip minus, voltage regulated) from various manufacturers for musical instruments with input DC voltages from +9V to +18V. A 9V battery is not included with this product. If a battery is required, please prepare it separately.

Please ask any questions before buying. Thanks for looking!