Se Electronics X1 R All Metal Ribbon Microphone+Boom Arm+XLR Cable+Backpack

Package Includes:

• (1) Se Electronics X1 R All Metal Ribbon Microphone w/Gold Plated XLR Connector
• (1) Rockville RG30 ROGAN STAND 30" Pro Boom Arm Mic Stand w/ Fixed Mount+Desk Stand
• (1) Rockville RCXFM20E-B 20 Foot Female to Male XLR Mic Cable Black 100% Copper
• (1) Rockville RPAK Charcoal Stylish Durable Backpack Bag w/ Padded Laptop Pocket

What's in the box:

• X1 R microphone
• Swivel mic clip
• Mic stand thread adapter

Description:

A rugged ribbon for any purpose
The second addition to the X1 Series, the X1 R brings the magic of traditional ribbon mics into the modern age with a tough construction that can handle any SPL. This is a ribbon you can take on the road. The sE Electronics X1 R is suited to a variety of recording applications, including guitar cabs, overhead drums, brass, woodwind, strings, commercial broadcast and voice-over.

Features:

• State of the art ribbon element enclosed by top-grade Neodymium magnets
• Classic sounding ribbon mic with a gentle HF lift and high SPL handling
• Integrated HF (High Frequency) extension technology found in the VR1/VR2 ribbon microphones
• All-metal housing and gold plated XLR connector

Specifications:

• Recommended Use
  
  • Vocals, drum kit, OH, room, acoustic guitar, electric guitar cab, orchestral + strings, piano, woodwinds, brass
• Components
  
  • Transducer: Hand-crafted 2.5 µm aluminum ribbon
• Power
  
  • Electrical impedance: 200 Ohms
  • Connectivity: 3-pin male XLR connector
  • Powering: N/A (phantom-protected)
• Sound
  
  • Polar patterns: Figure-8
  • Frequency range: 20 Hz - 16 kHz
  • Sensitivity: 1.8 mV / Pa (-55 dBV)
  • Max SPL: 135 dB (0.5% THD @ 1kHz)
  • Equivalent noise level: 23 dB
  • Signal to noise ratio: 71 dB
  • Electronics: Passive
• Dimensions
  
  • Mic weight: 510g / 17.99oz

All About Your RG30:

How To Set Up Your RG30:

How To Set Up Your a Dynamic and Condenser Microphone to Your RG30:

How To Set Up a Smartphone or Tablet to Your RG30:

What's in the box:

• Boom arm stand
• Allen key
• 2" long M8 screw (for desk surface-mounting)
• 4" long M8 screw (for desk surface-mounting thicker desks)
• C-Clamp for desk clamping
• Fixed mounting plate to mount it into your desk (comes pre-instal to the C-clamp, see our video for how to install)
• Built-in 6.5 foot XLR cable that is hidden and run inside the boom arm stand
• Mic clip

Description:

Why is this better than others?

• Our model includes a high-quality C-clamp so you can mount the stand to the side or the back of a table or desk. But what really sets our item aside is that we also give you the ability to mount this to the top of the desk for a cleaner installation. This enables you to mount the boom arm in the most optimal location on your desk.
• We eliminate clutter by including a cable that is fixed inside of the boom arm and completely hidden. If you need to replace the cable you can easily replace it.
• Our boom arm has a great telescoping mechanism that makes it easy to adjust yet it will firmly stay in place.
• The look of this is very professional and clean. There are no springs or other eye-sores.
• Our boom arm completely folds in half if you need to travel with it.
• We build our model out of Aluminum which costs more than steel. What makes this great is it will never rust and it is more light-weight and higher quality.
• We include all the screws and cables, mic clip, and installation video for installing it on the top of your desk.

Features:

• Rockville RG30 ROGAN STAND 30” Inch Pro Boom Arm Mic Stand
• Includes XLR cable built into the stand that is hidden inside the stand for a clean look
• Deluxe pro version is one solid piece with no visible springs and an advanced articulation mechanism
• Easily Mounts to the top of a desk (See our install video)
• Easily clamps to the side of a desk with the included C-Clamp (supports desks up to 2.3" inches thick)
• This is made out of aluminum which is rust-free and lighter weight
• Arm length: 14" + 14"
• Position is completely adjustable
• Firmly stays in place once you adjust it
• There is a safety locking pin for the arm to lock in place (other similar stands do not have this)
• Foldable design, just pull the knob in the middle of the stand and it folds in half (Other similar stands do not have this)
• Standard 5/8" Mic Threads for Connecting Most Podcast and Vocal Microphones
• Suitable for studios, broadcasting, podcasting, and more

All About Your RPAK CHARCOAL:

How To Set Up Your RPAK CHARCOAL:

Features:

• Rockville RPAK Charcoal Stylish Durable Backpack
• Main zippered compartment is 15” W x 21.75” H in the extended position and 15” W x 18” H in the folded position
• Padded Laptop Pocket with Velcro in the main compartment (fits up to 15” laptop)
• Hidden side zippered compartment
• Padded and adjustable backpack straps
• 2 open pockets on the sides for drinks or an umbrella
• Durable Nylon Fabric

All About Your RCXFM20E-B:

All About Your RCX Series Cables:

Description:

All Rockville pro audio cables are made with 100% copper which boosts the efficiency of the cable. There is nothing better than 100% copper. Most of the cheaper cables on the market do not use 100% copper, instead they make their cables with CCA (Copper Clad Aluminum). CCA cables do not perform on the level that 100% copper cables perform at. CCA will not conduct signals efficiently. A 12 gauge CCA cable will not even perform as well as a 14 gauge 100% pure copper cable, which will in turn, affect the performance and longevity of your equipment. If you find cables on the market that do not mention the copper content, there is a good chance that they are selling you a cheaper cable that is CCA and not 100% copper. Rockville pays an inspection company to oversee the manufacturing of the product to ensure that we provide a 100% Oxygen Free Copper Cable (OFC). Our OFC cables are less prone to oxidation, and will provide maximum signal transfer.

The other important factor of a cable is the shielding. Most of the good brands on the market have about 85% shielding coverage, so we decided to take our shielding a step further. Rockville cables are shielded with a tight copper mesh, covering 90% of the cable! The high percentage of coverage increases the ability to absorb the Electromagnetic Interference (EMI) and Radio Frequency Interference (RFI) that suppresses signal and degrades the performance of equipment. Rockville Cable's copper shielding provides great flexibility, maintains a durable structural integrity, while decreasing signal interference ensuring enhanced signal clarity with every use.

Features:

• Rockville RCXFM20E-B Black 20 Foot Nickel Plated Female to Male XLR Microphone Cable
• XLR Connectors with Internal Strain Relief for Rugged Reliability
• 100% Copper Conductors for Enhanced Signal Clarity
• 90% OFC Spiral Shield for Effective EMI and RFI Rejection and Flexibility
• Length: 20 Ft
• Color: Black