Is this pedal in mint condition? Yes, it is. It is pristine!
Does it come with original box and contents? Yes, it does.

NO V E L C R O
NO FINGERPRINT

USPS Domestic shipping options:

• $ 1.95 w/ no signature request
• $ 4.45 w/ Signature request

NO dings - NO chips - No cracks and NO blemishes on it..No finger print!

The Blackbird from Effectrode is a two-channel, valve-driven guitar preamp. Essentially the front end of a valve amp stuffed into a pedal, the Blackbird can sit in front of your amplifier, putting two additional, footswitchable channels at your disposal. It's also equipped with a speaker-simulated direct out for recording, feeding a PA or practising with headphones. The unit uses three dual-triode valves, the first two providing up to four cascaded gain stages and the third driving the buffered output. It ships with three 12AX7 tubes installed, but the first of these can be swapped for a different valve of a similar type (12AT7, 12AY7 and so on) to change the pedal's response and gain characteristics.

Two Truely Independent Channels: Add multiple channels to your vintage/boutique guitar amp! The clean channel is a replica of the classic Blackface circuit Leo Fender created from the RCA Receiving Tube Manual and is beautifully warm and glassy sounding. The overdrive channel is a variation on the hot-rodded 4-stage Dumble/Soldano circuit and packs a huge degree of flexibility ranging from warm and fat blues drive tones, through classic rock crunch, to harmonically-saturated, savage metal tones.
Classic Tone Stacks: Each channel has its own dedicated Bass, Mid and Treble controls based on the interactive tonestacks found on the Blackface amps.
Tube Buffered Output: For connection to guitar amplifier. This output is a low impedance tube cathode follower stage with +10dBu of gain and is capable of driving long cable runs with lowest possible tone loss.
Transformer Balanced Out: For superb professional quality direct recording. Triad transformer isolated balanced output (600 imepdance) with +6dBu gain allowing direct connection to mixing desk, PC sound capture card or power amplifier. The transformer is driven by audiophile discrete class AB transistor circuitry (the only solid-state components in the entire signal path) and imparts some additional sweetness to the guitar signal in fact, speaker emulation often isnt even necessary when recording direct, just a some eq and a little reverb can create incredible, full-bodied tones.
Adjustable Bias: External switch allows biasing to be selected for 12AX7, 12AU7 or 12AY7 tubes installed in the overdrive channel. Internal bias trim pot allows further adjustment for other types of dual stage miniature B9A tube such as 12AV7, 12AT7, etc. Swapping tubes allows the fundamental character of the drive channel to be altered to replicate a wide range of vintage guitar amps and create new sounds too.
Tube swapping: The tone and gain characteristics of the Blackbird pedal can be fine-tuned by interchanging tubes the pedal is designed for easy access to the tubes for this purpose. In the time it takes to change a light-bulb the core tone of the overdrive channel can be tailored to your exact requirements from subtle break-up, to mellow blues and vintage or saturated modern rock distortion, this pedal has wide versatility and all by simply removing a tube and replacing it with a different type.
All Tube: The Blackbird is an entire tube preamp section in a pedal format. The signal path is 100% pure analog built with vacuum tubes operating at amp plate voltages. D.C. powered tube heaters ensure absolute quietest possible operation.
Audiophile Components: Absoutely no skimping on the quality of the components polyester capacitors and instrumentation grade metal-film resistors are used throughout the audio signal path. Find out more about the Effectrode engineering ethos on component quality here!
Dakaware Knobs: Authentic phenolic Dakaware, Chicago 1510 knobs custom manufactured for Effectrode in the U.S.A using the original 1940s moulds.
Extremely compact: The Blackbird is small enough to carry in a gig bag with your cables, tuner and other tools of the trade. You'll be sure of unparalleled tone wherever you roam and it makes a great backup as a spare rig. No guitarist should leave home (or be at home!) without it!
Housed in a real metal box: The Blackbird is built to last and for rigorous touring each preamp pedal is housed in an aluminium alloy enclosure which powder-coated with a stoved epoxy silkscreen.
True Bypass Switching: With Effectrode's unique anti-pop or thump footswitching circuitry utilising sealed, gold-contact relay to eliminate the possibility of dirty contacts degrading the sound and minimial internal audio path.
Includes 12V Wall-wart Power Supply: High quality low-noise switched mode 12VDC at 1.5A wall-wart compatible with all our pedals. Accepts 100V to 240VAC mains input and comes with different mains outlet adaptor plugs, so there is always a plug that fits the country that you are playing in.
Named after the coolest plane ever built!: The Blackbird SR-71 operated at Mach3+ to allow the pilot to outrun ground-to-air missiles! Like it's counterpart the Blackbird vacuum tube preamp puts you in control of your core drive sound.

Made in the UK!

Please ask any questions before buying. Thanks for looking!