JHS The Milkman Echo/Slap Delay Pedal With Boost
Price$179
Free Shipping
Free Shipping
from Waterford, MI
Only 1 left
Grab it before it's gone
Listed:over a month ago
Views:1913
Watchers:38
Waterford, MI, United States
About This Listing
JHS The Milkman Echo/Slap Delay Pedal With Boost
The Milkman is a collaborative idea between Josh Scott of JHS Pedals and Tim Marcus of Milkman Sound. The concept is simple; a single pedal that offers up an echo/slap delay and a boost that can be used as an always-on enhancer or as an overdrive for small wattage amplifiers. Josh designed the circuit in late 2016 and here we are, a small footprint, easy to use boost/echo 2-in-1 that fits into any style players rig with ease. Let's look at the controls.
The right side of the pedal is the boost side. This boost is a discreet amplifier based circuit with tons of power and character. Simply set it low at unity gain for an always-on enhancer that fattens up and clarifies your tone, or turn more clockwise to push your tube amplifier into sweet natural overdrive. The left side of the pedal is the echo/slap delay circuit. This circuit is designed to be a hybrid of tape echo and analog BBD delay. The controls are simple and it sounds good in every setting. The “Slap” knob is the amount of delay time. As you turn the knob up, you will get longer delay times. Keep in mind, this pedal is designed for shorter vintage slap-back delay times. The “Mix” knob is the effect level. Full counter clockwise is all dry and full clockwise is full wet/effect. The “Repeat” knob controls how many echoes or repeats you get. The minimum is one and maximum is around 4.5 repeats. "Repeat" knob lets you fine tune how many delays you will get. Lastly is the “EQ” knob. This control only affects the repeat delay signal so that you can perfectly adjust the brightness or darkness of your echo. When fully counter clockwise the repeats are at their darkest much like an old BBD analog delay. When fully clockwise the repeats are the brightest they will be with more grit, this is much like a classic tape delay machine.
The footswitching is our typical 2 in 1 arrangement where either effect can be used separately or together. The foot switch on the left, the switch will turn the delay on/off and the footswitch on the right will turn the boost on/off.
The Milkman uses standard 9v DC Negative power only.
Features:
• Slapback delay and a great-sounding boost in 1 pedal
• Designed in collaboration with Tim Marcus of Milkman Sound
• Delay features controls for dialing in tone's amount, time, sound, and more
• Boost function is independently footswitchable and 100% variable
• True bypass construction
• Compact size is pedalboard friendly
The Milkman is a collaborative idea between Josh Scott of JHS Pedals and Tim Marcus of Milkman Sound. The concept is simple; a single pedal that offers up an echo/slap delay and a boost that can be used as an always-on enhancer or as an overdrive for small wattage amplifiers. Josh designed the circuit in late 2016 and here we are, a small footprint, easy to use boost/echo 2-in-1 that fits into any style players rig with ease. Let's look at the controls.
The right side of the pedal is the boost side. This boost is a discreet amplifier based circuit with tons of power and character. Simply set it low at unity gain for an always-on enhancer that fattens up and clarifies your tone, or turn more clockwise to push your tube amplifier into sweet natural overdrive. The left side of the pedal is the echo/slap delay circuit. This circuit is designed to be a hybrid of tape echo and analog BBD delay. The controls are simple and it sounds good in every setting. The “Slap” knob is the amount of delay time. As you turn the knob up, you will get longer delay times. Keep in mind, this pedal is designed for shorter vintage slap-back delay times. The “Mix” knob is the effect level. Full counter clockwise is all dry and full clockwise is full wet/effect. The “Repeat” knob controls how many echoes or repeats you get. The minimum is one and maximum is around 4.5 repeats. "Repeat" knob lets you fine tune how many delays you will get. Lastly is the “EQ” knob. This control only affects the repeat delay signal so that you can perfectly adjust the brightness or darkness of your echo. When fully counter clockwise the repeats are at their darkest much like an old BBD analog delay. When fully clockwise the repeats are the brightest they will be with more grit, this is much like a classic tape delay machine.
The footswitching is our typical 2 in 1 arrangement where either effect can be used separately or together. The foot switch on the left, the switch will turn the delay on/off and the footswitch on the right will turn the boost on/off.
The Milkman uses standard 9v DC Negative power only.
Features:
• Slapback delay and a great-sounding boost in 1 pedal
• Designed in collaboration with Tim Marcus of Milkman Sound
• Delay features controls for dialing in tone's amount, time, sound, and more
• Boost function is independently footswitchable and 100% variable
• True bypass construction
• Compact size is pedalboard friendly
| Condition | |
| Brand | |
| Model |
|
| Categories | |
| Pedal Format |
|
About the Seller
Joined Reverb:2014
Items Sold:28,923
Product Overview
Get warm always-on slap back echo and an organic overdriven bump delivered to your doorstep in one pedal with the JHS Milkman. Designed in collaboration between Josh Scott of JHS and Tim Marcus of Milkman Sound, this dual function effect sports a hybrid circuit which captures the best of Bucket Brigade Delay analog tone and tape echo for spanky vintage slap with delays up to 240ms. For added gusto, the Milkman also brings a single knob boost function into the fold that can be used to either fatten up your natural tone or be kicked in for a tube-like overdrive.
Shop 61 options from $129
Product Reviews