Bass Preamp & Boost

The Bassbone V2™ is a two channel bass preamp with a number of customizable features to suit any type of setup or playing style, while providing superb audio quality ideal for a live stage or studio recording.

The ultimate bass control center

The Bassbone V2 combines high quality audio performance with the ability to take control of your tone and configure each feature to match your ideal setup. Seamlessly switch between upright and electric basses, while tailoring the signal from the upright with a three band EQ, high-pass filter, and a high impedance input for a more natural tone. You can engage your effects pedals with a single footswitch, and assign them to either input individually, or share them across both. A wet/dry control for the effects loop provides the ability to blend the original bass signal in with the output from the pedals, preserving the tone and clarity of your instrument. The Bassbone V2 also features a powerful clean boost that can be activated with a footswitch, or reconfigured as a mute switch for silent tuning on stage.

Specifications Audio circuit type: Discrete class-A FET input with low noise ICs. Frequency response: 20Hz ~ 18kHz Dynamic range: 85dB Gain: Unity gain device Total harmonic distortion: 0.05% @ -15dBu Intermodulation Distortion: 0.2% @ -20dBu Input Impedance: 220K Ohms input A, 220K/10M Ohms input B Output Impedance: 300 Ohms at XLR Equivalent Input Noise: -92dBu at XLR Noise Floor: -100dB Maximum Input: +7 dBu Features 180° polarity reverse, Ground lift, HPF, Boost Input Connectors: 1/4" Output Connectors: 1/4", XLR General Construction: 14 gauge steel Size (L x W x D): 5.5" x 4.2" x 2" (203 x107 x 48mm) Weight: 2.55lb (1157 grams) Power: +15VDC/400mA adapter included Conditions: For use in dry locations only between 5°C and 40°C Warranty: