4ms Row Power 35 Eurorack Power Module (1400mA)

Row Power is a clean, regulated, and protected power solution for eurorack systems. Row Power 35 provides 35W of power, suited for any typical eurorack row (84HP to 168HP):

+12V @ 1.4A
-12V @ 1.25A
+5V @ 1.0A
Simply plug a universal power supply (laptop style) into either of the barrel plugs on the 4HP panel. Connect your modules via flying-bus cables or the Bus Stick.

Daisy-chain multiple Row Powers to use a single power brick for multiple rows (typically 3-5 rows per power brick). Each row will be independently regulated and protected for ultra-low cross-talk between rows. Rows can also be hot-swapped (plugged/unplugged without powering the whole system down).

Basic Features:

Two power jacks for daisy-chaining multiple ROW POWERS: a common laptop-style power brick could power 3-5 rows (typical)
On/off switch cuts power without interrupting the daisy-chain
ROW POWER 35 provides more than enough power for a 84HP or 104HP row of modules.
Ultra-clean: Each rail is separately regulated with high-grade components
Runs cool: ROW POWER is efficient so it won't heat up your system. Electronics like to chill!
Skiff-friendly: only 27mm (1.1") with power connectors installed.
CV/Gate headers for expansion
PCB supports blade tabs for power entry, to be used in custom installations (e.g. if the 4HP panel is not used)

Electrical and Mechanical Specifications:

Module Size:
4 HP Eurorack format module
Power Output:
+12V @ 1.4A, -12V @ 1.25A, +5V @ 1.0A
Powered by laptop-style DC power supply: 2.1mm barrel, positive center, 15V-20V.
Included with the Row Power 35:
16-to-16 pin power cable
2 M3 Knurlie screws