• Model: PB-63
• Serial Number: AGH-161
• Body Wood: Alder
• Neck Wood: Maple
• Neck Profile: C Shape, .853" deep at 1st fret, .942" deep at 9th fret
• Radius: Nautilus Radius (see below)
• Fingerboard: Rosewood 
• Scale Length: 34"
• Inlays: Clay Dots
• Nut: Tusq, 1.63"" width
• Tuners: Vintage Style
• Bridge: Vintage Style w/ 4 threaded saddles, Nickel
• Pickguard: Tortoise
• Pickup: Lollar Split P
• Finish: Olympic White Over Sunburst - Heavy Relic, Matching Headstock (Upgrade)
• Case: SKB Hard Shell Case
• Weight: 8 lbs 9 oz
• Handmade In Olympia, WA - USA

NAUTILUS NECK

A Revolutionary Breakthrough in Guitar Necks

(From the Nash Guitars website:)

• Significantly Lower String Height/Action

• Freedom from Fret Rattle

• Increased Sustain and Resonance

• Effortless, Unlimited Bends—Without Fretting Out

Guitars and other fretted instruments have long been relying on a fundamentally flawed system of fretboard and fret radii. Traditional single-radius and even common compoundradius necks require significant relief and higher-than-desired action to compensate—for string clearance, bending, and reducing fret buzz. It’s functional, but far from optimal.

Nash has found a better way: Using the same math that determines fret spacing (commonly called “The Rule of 18”—where each fret is 1/18th closer than the last), we applied this principle to fretboard radius. The result? A radically progressive radius, where every fret is 1/18th flatter than the one before it. This means that every position you place your fingers, the position one step above has built-in clearance. This clearance is normally achieved through neck relief and high action. The Nautilus neck does this by the radical new design.

The outcome is game-changing: Nash's patented Nautilus Neck design requires little to no neck relief. Action can be set incredibly low, bending is easier and virtually unlimited thanks to mathematically optimized fret clearance.