This is 2015 Chapman ML-1.

25.5" scale length, 3 piece maple neck, ebony fretboard, jumbo frets, mahogany body

Hardware is Grover tuners, and Wilkinson bridge with stainless steel saddles.

Electronics are Seymour Duncan in the neck and bridge. Staggered single coil pickup in the middle. 3 way toggle switch and master volume and tone with push pull. Full sized Alpha pot as well.

I haven't pulled out the pickups so I'm not sure which Duncan's they are, apologies. I do believe the middle pickup is stock though.

Gig bag is included, tremolo bar is not.

The pick up selector is very unique on this guitar. Obviously there's three pickups but only a three way toggle switch. That's where the push pull on the tone comes in. You actually have 6 pickup combinations here

With the switch towards the neck pickup and tone pushed in you have Neck and split Bridge.

In the middle position you have both pickups on, neck and bridge

Bridge position you have neck split and bridge.

With the tone pulled and the switch towards the neck, you have Neck and middle.

In the middle you have all three pickups, bridge is split.

Towards the bridge you have middle and split bridge.

This guitar is 11 years old. It has a few signs of use. On the headstock, there are two dents. The neck has a small dent on the maple. The body has a few light buckle rashes, and a few dents along the edges. Please take a look and ask for more pictures if interested.

The guitar will need a fresh set of strings, obviously a set-up and some polishing on the frets.

Lastly, if you'd like a video of the guitar playing, please let me know!

Please let me know if you have any questions!