*This is for the 5 knob V1 version of the pedal

**Please specify color choice in order notes. Available in 2 colors: Black or Blue & Fushia.**

Vinyl sticker with waterproof laminate that shows the secondary functions of the pedal that can be accessed by holding both switches. the overlay also does a better job explaining the tape head and modes. I made this for myself cause I was sick of looking at the manual for the secondary function controls. But figured it might be of use to others.

Application is fairly easy. Remove the knobs. This can be easily done by sliding a string under them and gently pulling them up or if you have an acoustic bridge pin removal tool you can also slide it under the knob. You could also use a screw driver but this could scratch the finish. to get a tight fit I recomment also removing the two bottom switches (tap and bypass) when removed they may fall into the body of the pedal so you may need to unscrew the back to access them when re-mounting. Next I'd recommend lining up the decal with the backing still on just to make sure everything will align. Once you remove the backing and start applying it is best to work towards the center out making sure that each of the holes are properly aligned. Then reassemble the pedal and you're ready to start playing. Apply at your own risk. Pedal not included.

Check out our shop for other pedal overlay listings.