The sE Electronics DM1 is a Dynamite Active in Line Mic Preamp with 28dB Gain designed for neutral, balanced sound quality, the perfect way to boost the signal of a passive microphone gain stays consistent regardless of connected load provides significantly improved level to your mic preamp for proper gain staging. With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.

Whether you’re a podcaster, recording engineer, or running live sound, the DM1 is the perfect way to boost the signal from a passive mic, reduce the likelihood of interference, and provide a significantly improved level to your preamp all without adding noise or coloration. Its output impendence is also the lowest in its class, allowing it to drive long cable runs while reducing susceptibility to RF interference, buzz, and hum.

Reliable operation even in demanding on-stage applications in difficult environments is ensured by the roadworthy and slim all-metal design, robust construction, and high-quality manufacturing standards.

DM1

sE Logo Sticker

User manual with warranty card

Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)

Gain: 28 dB (load 1kOhms)

Max Output Level (0.5% THD): 8.3 dBV (2.6 V)

Output Noise Level: 9 μV (JIS-A)

Powering: 48 Volts according toIEC 61938

Electrical Impedance: 135 Ohms

Recommended Load Impedance: >1k Ohms

Current Consumption: 3.0 mA

Connectivity: 3-pin male/female XLR connector

Dimensions: Diameter: 19 mm (0.75 in.) Length: 95.5 mm (3.76 in.)

Weight: 80 g (2.82 oz.)