lite use (generally very clean) Gibson (sourced from Ping Works - PW) Lightning Bar Compensated Wraparound Bridge, Chrome [+ studs & anchors & hex key tool] from mid 2010s Gibson LP Jr floor piece (guitar NOT included) Chrome Plated ZINC

Up for grabs is a very lightly used (generally very clean) Gibson (sourced from Ping Works) Lightning Bar Wraparound Compensating Bridge (Compensated Wraparound Bridge), Chrome [+ studs (mounting pieces), anchors (body inserts), & allen wrench (also called hex key) tool].

The "lightning bar" is a wrap around combination bridge/tailpiece.

• The selling price will be $5 less if you do NOT need the ANCHORS. Please make an offer with a message.

NOTE: the finish on this Lightning Bar Wraparound Compensating Bridge + the top areas of the studs are definitely CHROME. But in some of the pictures they look like they are Nickel (this is because of the lighting and the room's ambiance, etc).

• This bridge & the studs came off of a mid 2010s Gibson LP Jr floor piece (guitar NOT included) that I parted out a couple of years ago. Sorry I don't remember the exact year.
• Sorry - I NO longer have the parted out guitar and I do NOT have any of the other parts - I sold them a couple of years ago.

This bridge is Chrome Plated ZINC.

The weight of this bridge + the two left & right very small screws on it) weight 2.6 ounces.

NOTE: Not all of the imperfections on these items show up in the pictures - but they can be seen on person.

This guitar that bridge & studs came off of was hardly used (it was a store floor piece). Therefore - whatever imperfections this bridge & the studs have are from the bridge having been a on a guitar. And the guitar it is from was very lightly played on from time to time (for a short period of time before I parted out the guitar).

For several years - I have had this bridge, studs - and also the anchors and allen wrench (also called hex key) in a clear plastic baggie that was safely stored in a box in a closet. Pet-free / smoke-free home environment.

The Bottom Edge of the TOP SIDE has four tiny (some may say very small ) nicks - at Low E, A, D, at G areas - from the the strings wrapping around these areas.

The almost center area of each elevated line (that the strings go over) have one or two very tiny nicks / impressions from / at the A, D, G, B., high E areas). And for the low E area the nick / impression is very small.

Main Areas of TOP SIDE: Mostly very clean - - it just has a few very light very tiny pin point sized nicks, a few extremely small nicks, and a few very short dash hair-line scratches here & there -- but they don't really stand out.

The TOP Left and Right area where this piece get mounted has a few curved scratches.

BOTTOM SIDE/ UNDER-SIDE of this wrap around bridge: The center area has a very small mold of two letters and a number: PW and 1 under the PW. NOTE:

• PW stands for Ping Works which is a guitar hardware part company in Taiwan. For several years Ping Works (PW) was sourcing Gibson with certain guitar hardware parts like - bridges & stopbars. This was done in the 2000s and 2010s -- maybe even in the 1990s.
• Most areas are extremely clean. The are a couple of extremely tiny dimple here and there ( some people might not even notice them) form how this item was manufactured. The Left & Right ""U" shape area has a few very small nicks and / or a few extremely short dash scratches from when this item was mounted on a guitar (NO guitar included). Feel free to ask for close-up pics of these areas.

The Outer Curved Left and Right Sides are fine / very clean.

The Upper Long Narrow Side is mostly very clean - it just has a few very light very tiny pin point sized nicks here & there -- but they don't really stand out.

The STUDS (which are the mounting pieces) are SAE 5/16 - 24 threads. Overall the Top areas of the studs are very clean. If you closely examine them - you can see a few very light & & light tiny & extremely small surface imperfections (like nicks). Both top middles edge of each stud are fine. Most areas of the THREADED PART of the studs - they raise and lower on the anchors fine. The silver finish on a couple areas have light wear / light fading.

The ANCHORS (which are body inserts) are a very clean extra pair that I had. The CHROME color / finish on the anchors is duller than the fining on the lightning bar and on the studs.

The outer diameter of the ANCHORS is 1/2 inch (13mm). The internal threads of the anchors and the corresponding studs are SAE 5/16 - 24 thread.

• The selling price will be $ 5 less if you do not need the ANCHORS. Please make an offer with a message.

The allen wrench (also called hex key) tool is fine (it is lightly used).  It's a black color. It is about 2 and 1/4 inches long. The shorter part is 5/8 inch long.

• Please let me know if you do not need the hex tool.

I took several pictures of this wrap around bridge and these are some pictures of the other items for sale in this listing.  Feel free to ask for more pictures of this item.

There are some imperfections that can be seen in person that do not appear in the pictures.   There may be some imperfections that I overlooked in my written details.  And - there maybe some imperfections show up in the pictures that are not that visible in person: glares and dust specks).

• Comes from a smoke free and pet free environment.
• Feel free to ask questions.
• Will discount shipping on combined purchases!!
  
• USA Shipping is with USPS (with tracking).  
• International Shipping is with First Class Mail International (with tracking).

CA Prop 65 Warning!  
Everything sold into the state of California contains agents known to the state of California to