This is an Epiphone Les Paul Slash (see photo of back of headstock) model that has been hot rodded with Seymour Duncan Phat Cat P-90s that are sized for humbucker mount and that are made to satisfy rockers or any players wanting the p-90 crunch and lots of tone variety with plenty of LOUD when needed. The original Epiphone harness was replaced with an Obsidian solderless harness that offers a choice for either or both pickups to be heard through either '50s or '60s LP wiring. A hole in the control back plate allows changing the wiring via small switches on the harness. A small screwdriver or other small tool can be inserted in the hole and the switches changed as desired. This keeps players from having to remove the back plate for access. Kaish gold locking tuners are another significant upgrade as are the elliptical gold strap pins. There is one small blemish on the body front above and to the left of the bridge pickup. Too small to be seen on the famous LP vintage gold top finish. In its present form this guitar has been played fewer than two hours. Frets are like new, truss rod works as do all the electronics. Great guitar is maybe not for the faint of heart. It has D'Addario 10-46 flat wound strings. Rockers likely will want to go to 9s. 

Reverb-Käuferschutz

Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.

Beworbene ähnliche Inserate













Inseriertvor einem Jahr
ZustandNeuwertig (Gebraucht)
Neuwertige Artikel sind generell in fast neuem Zustand, aber wurden geöffnet oder gespielt bzw. benutzt.Weitere Informationen
Marke
Modell
  • Slash Signature Les Paul
Farbe
  • Gold top
Kategorien
Jahr
  • early 20s
Griffbrettmaterial
  • Palisander
Modellreihe
Korpusmaterial
  • Mahagoni
Halskonstruktion
  • Set-Hals
Serie
Rechts-/Linkshändig
  • Für Rechtshänder
Künstler
  • Slash
Anzahl der Saiten
  • 6-Saiter
Korpusform
  • Single Cutaway
  • Solidbody
Halsmaterial
  • Mahagoni
Offset-Körper
  • Non-Offset-Korpus
Modellunterfamilie
Finish-Stil
  • Glänzend
Farbfamilie
  • Gold
Steg/Tailpiece-Typ
  • Anschlagleiste
Tonabnehmerkonfiguration
  • HH
Deckenholz
  • Undurchsichtig
Mensur
  • 24,75 Zoll
Deckenmaterial
  • Ahorn
Anzahl der Bünde
  • 22

Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.

F.'s Gear Outlet

Bisbee, AZ, Vereinigte Staaten von Amerika
Mitglied bei Reverb seit:2022

Reverb-Schutz

Einfache Rücksendungen, sichere Transaktionen, Support von Experten

Weitere Informationen

Sichere Zahlung

Reverb Gives

Mit deinen Käufen unterstützt du Programme zur Förderung Jugendlicher, damit sie das Equipment erhalten, das sie zum Musizieren brauchen.

Ups, sieht aus, als hättest du etwas vergessen. Bitte prüfe die rot hervorgehobenen Felder.