Up for grabs is a used (has some nicks & scratches) unknown brand CREME PLASTIC RECTANGLE Jack Plate + nickel finish screws. Refer to measurements in description. Currently this jack plate lays FLAT - but it will flex a little when installed.
- might fit an Epiphone LP 100 model guitar (NO guitar included).
- might be from an Epiphone LP 100 model guitar (NO guitar included).
Measurements of Jack Plate (# 7, 8, 9, 10, and 11).
- Longer measurement: 1 and 5/16 inches
- Narrow measurement is 1 and 1/16 inches
- Screw Hole Spacing Long Side: 1 inch
- Screw Hole Spacing Short Side: 3/4 inch
- Hole for Jack: 3/8 inch
===
Length of Screws: very slightly less than 1/2 inch
NOTE: In the foist picture - the creme color looks a little lighter than it appears in person (due to the camera's flash / lighting). Also in In pictures # 6 to # 14 and picture # 23 you cannot see the imperfections that the TOP side actually has. Therefore please review all of the pictures.
Sorry I don't know / don't remember what guitar it's from. A friend gave this jack to me a couple years ago with a variety of other guitar parts.
- ONLY the advertised jack plate + screws is for sale in this listing.
Pictures # 12, # 13, and # 14 are color comparison pics. ONLY the jack plate pictured in the middle is for sale in this listing. Note: I plan to list the other two item (Gibson toggle switch WASHER and the unknown brand creme plastic SQUARE jack) later in the week.
===
Overall the jack plate is fine - but it was on a used guitar (guitar NOT included) so a couple of imperfections.
The TOP Side has a few very light, some very short light scratches, and a couple of not too light / not too deep scratches (some of which look light very light cloudy surface lines), and a couple of tiny & very small tiny nicks.
The area of the TOP side near the center hole has a few curved scratches from when a jack was on this jack plate.
- Jack Not included - but have some available for sale upon request. Message me.
The Main Outer Edges are mostly fine / clean - a couple of extremely tiny nicks (some of the nicks seen in the pictures are not that visible in person)
The Inner Edges of the Center Hole (where the jack goes through) is mostly fine / clean. Just a few tiny nicks.
The main areas of the BOTTOM side have some tiny and very small light nicks and some light extremely short hash scratches. The outer and inner edges are fine.
The Edges of the Holes for the Mounting Screws are mostly fine / mostly clean - just few tiny imperfections.
==
All of the SCREWS that I'm including have Phillips heads. They are nickel finish. Please let me know if you prefer chrome or gold screws instead.
- Two of the screws are mostly very clean.
- The heads of the other two screws have light surface discoloration on the heads (esp in the center area that has the indent).
***
Currently this jack plate lays FLAT. I 'm sure that when screwed on / when screwed down - the plastic jack plate will flex. Please do not force it to bend. It might take time for it to completely flex to the slight curve shape that it needs to be to snuggly fit on your guitar's body. Therefore - little by little (day by day) tighten it down more.
***
I took several pictures of this jack plate an there are some pictures of the screws. Also - there are a couple of measurement pictures and two color comparison pictures. Feel free to ask for more pictures.
NOTE: There may be some imperfections that can be seen in person that do not appear in the pictures. There may be some imperfections that I overlooked. And - there maybe some glares and reflections that show up in the pictures that are not that visible in person .
- Comes from a smoke free and pet free environment.
- Feel free to ask questions.
- Will discount shipping on combined purchases!!
- USA Shipping is with USPS (with tracking).
- International Shipping is with First Class Mail International (with tracking).
CA Prop 65 Warning!
Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Listed | 8 months ago |
|---|---|
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Finish |
|
| Year |
|
Product safety information may be available here.
























