1978 Gibson L-5CES sunburst
Excellent condition, 8,5/10, Made in USA, including non-original hardcase, the only thing worth mentioning are the burn marks from a guitar hanger on both sides of the headstock, otherwise very clean, all original parts, has just received a refret (at AdLib in Sundbyberg) and a pro set up so it plays great, more info:
The Gibson L-5 CES is the electric cutaway version of the iconic L-5 acoustic archtop. In the first years of production, it featured P-90 pickups and later Alnico V pickups until humbuckers debuted in 1957, which is still uses. Unlike most other Gibson guitars, it has a 25.5 inch scale. It featured a sharp cutaway between 1960 - 1969, with a rounded cutaway for all other years.
GIBSON L-5 CES Description
- single rounded cutaway (1951-1960 and 1969-present) or sharp cutaway (late 1960-mid-to late 1969) bound hollow body, carved spruce top, two bound f-holes, maple back and sides, maple neck, 14/20-fret bound pointed ebony fingerboard with pearl block inlays, multi-ply bound black headstock overlay with pearl flame/logo inlay, three-per-side tuners, ebony bridge with pearl inlay on wings, model name engraved trapeze tailpiece with chrome insert, layered tortoiseshell pickguard, two P-90 (1951-53), Alnico V (1954-1957), or humbucker (late 1957-present) pickups, four knobs (two volume, two tone), three-way pickup switch, gold hardware, 17 in. wide by 21 in. long by 3.375 in. deep, 25.5 in. scale, available in Natural or Sunburst (more common) finish, mfg. 1951-present.
In 1962, Pat. No. humbucker pickups replaced P.A.F. humbuckers. During 1973-76, the L-5 CES Custom Model was also offered, with a Super 400 neck - less than 20 were mfg. In 1974, neck volute was introduced. In 1981, neck volute was discontinued. Current production instruments (L-4 CES and L-5 CES models) are now part of the Historic Collection Series, found at the end of this section.
GIBSON L-5 CES
Features
- Single rounded cutaway (1951-1960 and 1969-present) or sharp cutaway (late 1960-mid-to late 1969) bound hollow body
- Carved spruce top
- Two bound f-holes
- Maple back and sides
- 14/20-fret bound pointed ebony fingerboard
- Multi-ply bound black headstock overlay with pearl flame/logo inlay
- Ebony bridge with pearl inlay on wings
- Model name engraved trapeze tailpiece with chrome insert
- Layered tortoiseshell pickguard
- Two P-90 (1951-53), Alnico V (1954-1957), or humbucker (late 1957-present) pickups
- Gold hardware
- 17 in. wide by 21 in. long by 3.375 in. deep
- 25.5 in. scale
- Available in Natural or Sunburst (more common) finish
Reverb-Käuferschutz
Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.
| Inseriert | vor einem Jahr |
|---|---|
| Zustand | Hervorragend (Gebraucht) Hervorragende Artikel sind fast ohne Gebrauchsspuren oder optische Fehler, aber wurden gespielt und vorsichtig benutzt.Weitere Informationen |
| Marke | |
| Modell |
|
| Farbe |
|
| Kategorien | |
| Jahr |
|
| Hergestellt in |
|
| Griffbrettmaterial |
|
| Farbfamilie |
|
| Korpusmaterial |
|
| Halskonstruktion |
|
| Korpusform |
|
| Rechts-/Linkshändig |
|
| Anzahl der Saiten |
|
| Halsmaterial |
|
| Modellreihe | |
| Offset-Körper |
|
| Finish-Muster |
|
| Finish-Stil |
|
| Steg/Tailpiece-Typ |
|
| Modellunterfamilie | |
| Tonabnehmerkonfiguration |
|
| Mensur |
|
| Anzahl der Bünde |
|
| Saitentyp |
|
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.



























