Fully compatible with Neutrik PowerCon™ connectors.  The Seetronic Power Connectors are UL listed.

Designed to panel mount into a standard D-series punch-out. The standard knockout for a D-series product is approximately 0.840" or 21.3mm. 27/32" will also work.

Since the method of mounting a panel-mount D-series connector varies, the mounting screws or rivets are not included with this connector.

Screws used for chassis connectors depend on panel material and panel thickness. We suggest the following:

• METAL PANEL - (with drilled hole that is not threaded) - Flat head thread forming screws, Pozidriv (recommended) or Phillips, M3 x length (drilled hole ~ 3.1 mm)


• METAL PANEL - (with M3 threaded mounting hole) Flat head metric machine screws, Pozidriv (recommended) or Phillips, M3 x length


• RIVETS -  It is possible to use any aluminum 1/8'' or 3.2 mm 90° countersunk blind rivet. We suggest drilling a hole diameter of 3.3mm for the panel. It is possible to use pneumatic, electrical or hand riveting tools.