A pair of RCH Audio Engineering Unbalanced to balanced converters. These use our own custom designed and wound transformers with a 1:1 ratio, Interwinding screen & large mu-metal core for minimal distortion. They have exceptionally wide and flat frequency response (within approx. 0.4db from 10Hz to 50KHz) & can handle high levels even at low frequencies. They are floating balanced on both sides with a TRS Jack input connector which allows them to accept balanced inputs such that they can be used as ‘balanced isolators’ too. Obviously with an unbalanced (or TS) jack plugged into the input, they operate as an unbalanced input.
The ground lift switch sits between the screen connection (pin 1) on the output XLR and the Sleeve on the jack input connector. Pin 1 from the XLR is also permanently tied to the case (for screening) & the interwinding screen on the transformer.
These are very decent sounding units.
They have been lightly used with a few odd marks etc. Tested, working & offered at a very reasonable price. I have two pairs for sale.
Any questions please ask.
Delivery is via Royal Mail tracked service within the UK mainland only.
Questo articolo è venduto "Come da descrizione”
Questo articolo è venduto "Come da descrizione" e non può essere restituito a meno che non arrivi in condizioni diverse da come è stato descritto o fotografato. Gli articoli devono essere restituiti nelle condizioni originali in cui sono stati spediti, con tutti gli imballi originali.Scopri di più.
| Pubblicato | un anno fa |
|---|---|
| Condizione | Eccellente (Usato) Gli articoli "Eccellenti" sono quasi completamente privi di difetti e altri difetti visivi e sono stati suonati o utilizzati con la massima cura.Scopri di più |
| Marchio |
|
| Modello |
|
| Categorie | |
| Prodotto in |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.




