The red DM1 Dynamite Active In-Line Microphone Preamplifier from sE Electronics is an active preamp intended to be inserted between a passive ribbon or dynamic microphone and a microphone preamplifier (sold separately). It can be used to deliver a robust 28 dB of gain to boost the audio signal of a passive mic, which improves the level through the preamplifier without adding noise or coloration. With a sophisticated Class-A design and high-grade FETs, the DM1 has a low self noise. It is built with a dedicated output buffer amplifier allowing it to drive long cable runs and reduce RF interference, buzz, and hum. Additionally, the DM1 Dynamite Active In-Line Microphone Preamplifier offers a roadworthy, slim, all-metal design, ensuring reliable operation for onstage applications in difficult environments. The unit features standard 3-pin XLR connectors and requires 48V phantom power for operation.

Product Features

• Sophisticated Class-A Design and Specially-Selected High-Grade FETs for a Signal Boost Without Coloration
• Vastly Lower Output Impedance and Nearly Half the Noise of Anything Else on the Market to Raise Any Mic Level with Clarity
• Always a Consistent +28dB Regardless of the Connected Load to Enable Mics with a Lower Output
• Provides Improved Level to a Preamp All Without Adding Noise or Coloration, Bringing New Life to Your Favorite Passive Microphones
• Gold Plated XLR Connector for Loss-Free Reliable Signal Connection
• All-Metal Housing and Premium Finish Ensures the DM1 Can Handle Demanding On-Tour Lifestyles

Attributes

• Color: Red

Technical Specifications

• Type: Solid State
• # of Channels: 1
• Dimensions: 0.75" Diameter x 3.76" L
• Inputs: 1 x XLR
• Outputs: 1 x XLR
• Frequency Response: 10Hz to 120kHz (-0.3 dB)