This one is in beautiful cosmetic condition and working 100%. It has just come back from being serviced and with some restoration from Custom Vintage Keyboards in North Hollywood, CA. It will come with the original legs, cross-bars, and Vintage Vibe reproduction sustain pedal. It will need to be shipped via freight due to it's size. Please keep this in mind. The shipping price shown may be wrong and could be less. If it is, you will be refunded the difference. Shipping to most countries! Please be aware that shipping overseas will be very expensive.

Cosmetically- The tolex on this one is original and in very good shape with no tears. There are a few very minor scuffs, indentations, and a few small burn marks on a few keys. I didn't think they were bad enough to replace. The hardware had some oxidation so it was replaced with original, nos latches, hinges, and handle caps. The brace mounting plate is a used, vintage original part. The badge in the back, the front rail badge, and harp cover are new reproductions. As mentioned, it will include the original legs, cross-bars, and a Vintage Vibe reproduction sustain pedal.

Internally- The unit has been fully disassembled, the tolex cleaned and treated, new hardware installed, the sustain push peg bushing felts replaced, sustain rail hinge felts added to reduce movement noise, the guides glued in place due to movement and falling out, the electronics, keys, and keybed have been fully cleaned, the action bump modification installed, and the action has been treated with silicone spray. The tonebar isolation grommets were replaced (the original screws and washers were kept since they were still in very good condition). The keys were leveled, the hammer tips were trimmed for optimum tone and balance, the pots and jack nuts replaced, new felt installed on the bottom of the front rail, everything voiced, the pickups were aligned, the dampers adjusted, and tuned to A440Hz. I may be forgetting a few things here so this might be updated.