Shure MV7i Smart Mic & Interface

The Shure MV7i is the ultimate all-in-one USB microphone solution for capturing professional-quality audio on your computer, tablet or smartphone. With a built-in audio interface, this dynamic mic streamlines your recording or streaming setup—letting you connect additional XLR mics and instruments directly with no need for external interfaces. Whether you're a musician, podcaster or content creator, the MV7i delivers broadcast-ready sound with advanced recording capabilities.

Pristine Vocal Reproduction

The dynamic microphone element in the MV7i is tailored specifically for rich, natural vocal recording. Its unidirectional cardioid polar pattern captures every nuance of your voice with stunning clarity while rejecting unwanted off-axis sounds. You'll experience full, detailed vocal reproduction—bringing out the warmth and expressiveness of your singing and speech. With the MV7i, your voice takes center stage.

Voice Isolation Technology

Shure's proprietary Voice Isolation Technology actively works to separate your voice from ambient room sounds. It utilizes precise polar pattern tuning and advanced DSP to focus on your vocals while suppressing background noise. This allows you to record or stream with professional clarity even in less-than-ideal environments. Your voice cuts through with incredible presence while environmental distractions fade away.

Connect Additional Mics and Instruments

With its built-in combo XLR/1/4" input, the MV7i instantly becomes a 2-channel audio interface for your computer. Simply connect a microphone or instrument like a guitar or keyboard, then route both signals to your favorite recording software. The MV7i provides +60dB of gain and 48V phantom power for powering any dynamic or condenser mic. You can even capture two sources simultaneously—recording vocals and an instrument at the same time with professional separation.

Powerful DSP Suite Optimizes Audio in Real Time

The MV7i is packed with cutting-edge DSP features to ensure your recordings sound their absolute best. Auto Level Mode with SmartGate automatically recalibrates the gain to compensate for fluctuating volumes. A real-time Denoiser reduces persistent background noise for crystal-clear audio, while the Digital Popper Stopper eliminates harsh plosives. You can also dial in adjustable Reverb, EQ, Compression and Limiting—all configurable in the MOTIV apps. With these advanced tools, you'll achieve broadcast-ready sound no matter where you record.

Features

• Voice Isolation tech
• Optimized frequency response
• Combo XLR/1/4" input, +60dB gain, 48V phantom power
• Advanced DSP

Specs

• 20Hz–20kHz, A-weighted: –118dBFS (with Auto Level Mode and Real Time Denoiser enabled)

Inputs

• Supported Types: XLR, 1/4" TS, 1/4" TRS
• Input Impedance (XLR): 5.8 kohms
• Input Impedance (1/4"): 1 Mohms
• Adjustable Gain Range: 0 to +60dB (mono), 0 to +40dB (stereo mode)

Maximum Input Level

• XLR: -14dBV
• 1/4": 7dBV
• Digital Noise Floor: XLR: –118dBFS (with Auto Level Mode and Real Time Denoiser enabled)
• 1/4": –97dBFS (@10dB gain)
• Phantom Power: Yes (+48VDC)

System Specifications

• On-Board DSP: Auto Level Mode with SmartGate, Digital Popper Stopper, Real-Time Denoiser, Tone Slider, Reverb, Compressor, Limiter, High-Pass Filter
• USB Host Requirements: USB Audio Class 2 (UAC2), Powered through USB Bus Power (USB 2.0 or higher)
• A/D Converter: 24-bit, 48kHz (16-bit, 44.1kHz support for iOS)

Output Specifications

• Headphone Output: 3.5 mm (1/8")
• Connector Type: USB-C port

Physical Specifications

• Stand Mount Type: 5/8"-27 thread mount
• Housing: Die-cast aluminum
• Net Weight: 1.25 lb.

Dimensions

• Microphone Length: 6.67"
• Microphone Diameter: 3.54" (90 mm, including yoke and knobs)
• Mic in Yoke: 6.46" x 8.15" x 3.54" (164 mm x 207 mm x 90 mm)

Accessories

• Includes: One 9.84' (3 m) USB-C to USB-C cable

Software Compatibility

• Compatible Software: MOTIV Mix Desktop App, MOTIV Audio iOS & Android Apps