Specifications for 888 Audio Interface.
The 888 I/O is an audio interface used with Pro Tools Project (3.2 or later), Pro Tools III (3.0 or later), or Session 8 PC (2.5 or later). It connects to any of the following cards: PT Project, Disk I/O, Bridge I/O, or Session 8 PC I/O.
Analog Input/Output: Balanced XLR, pin 2 hot, internally switchable +4dBu/-10dBu per channel.
Output Impedance: 50ohms typical (45 min, 55 max)
Input/output Level Trim: 6-turn cermet trims.
Digital I/O: 4 AES/EBU pairs (XLR); 1 S/PDIF pair (RCA); 16-bit I/O on NuBus/PC, up to 24-bit I/O on PCI (software dependant).
External Sync: 256x sample rate (Super Clock) in/out, about 3 Vpp, BNC connectors.
NuBus Card Connector: 50-pin, SCSI2-type female.
Sample Rates: 44.1k or 48k.
Analog-to-Digital Converters: 1-bit Delta-Sigma;128x Oversampling; 16-bit (18-bit with PCI).
Digital-to-Analog Converters: 18-bit; 64x Oversampling.
Operating Level: +4 dBu nominal (factory calibrated to 18dB headroom).
Maximum Input Level: +26dBu.
Frequency Response: 20Hz to 20kHz, +/-1dB.
Signal-to-Noise Ratio: -104dB (A-Weighted).
THD + N: .004%, 0 dbFS @ 1kHz, 22 Hz - 22 kHz bandwidth.
Power Requirements: 90-260 VAC, 47-63 Hz, 30 watts, auto-switching.
Dimensions: 2U External rack mount device; 19" x 3.5" x 9.75".
Weight: 7 lbs.
Cet article est vendu « en l’état »
Cet article est vendu « en l'état » et ne peut pas être retourné sauf s'il est dans un état différent de ce qui est décrit ou photographié. Les articles doivent être retournés dans leur état d'origine, tels qu'ils ont été expédiés, dans leur emballage d'origineEn savoir plus.
| Mis en ligne | il y a 2 ans |
|---|---|
| État | Bon (occasion) Le matériel en état « Bon » fonctionne mais peut montrer des signes d'usure normaux.En savoir plus |
| Marque | |
| Modèle |
|
| Finaliser |
|
| Catégories | |
| Année |
|
Des informations concernant la sécurité des produits peuvent être disponibles ici.




