1985 Ibanez Japan AR300 Artist Double Cutaway w/Floyd Rose (Antique Violin Sunburst)
Made by the Fujigen factory in early 1985, the AR300 was one of the most popular Artist models in the Ibanez range (both then and now). Mahogany body set to a three-piece maple neck with a 22 fret ebony fingerboard (628mm scale length, 44mm nut width), it weighs a beefy 4.5kg's. Loaded with the original Super 58 humbuckers controlled by a standard Les Paul style control setup with two "Tri Sound" mini toggles along with the original Velvetune machine heads. This one was professionally routed and modified to house an original Floyd Rose tremolo system (seemingly in an attempt to make it closer to the AR350 model).
Overall this one's in reasonable condition for it's age with plenty of basic signs of wear and tear from general use. The frets are shiny and smooth with plenty of life left and the neck is straight with a fully functional truss. There's some binding rot/crumble that's common for these but most of it seems to be stable at this stage.
Overall this one's in reasonable condition for it's age with plenty of basic signs of wear and tear from general use. The frets are shiny and smooth with plenty of life left and the neck is straight with a fully functional truss. There's some binding rot/crumble that's common for these but most of it seems to be stable at this stage.
Reverb-Käuferschutz
Reverb hilft dir weiter, wenn dein Artikel verloren geht, beschädigt ist oder nicht der Beschreibung entspricht. Melde alle Probleme einfach innerhalb von 7 Tagen und wir verhelfen dir zu einer vollständigen Rückerstattung.Erfahre mehr über den Reverb-Käuferschutz.
| Inseriert | vor 2 Jahren |
|---|---|
| Zustand | Gut (Gebraucht) Artikel mit Zustand Gut funktionieren einwandfrei, können aber einiges an Makeln oder Spielspuren aufweisen.Weitere Informationen |
| Marke | |
| Modell |
|
| Kategorien | |
| Farbfamilie |
|
| Korpusmaterial |
|
| Halskonstruktion |
|
| Korpusform |
|
| Rechts-/Linkshändig |
|
| Anzahl der Saiten |
|
| Halsmaterial |
|
| Offset-Körper |
|
| Finish-Muster |
|
| Finish-Stil |
|
| Modellreihe | |
| Steg/Tailpiece-Typ |
|
| Tonabnehmerkonfiguration |
|
| Mensur |
|
| Deckenmaterial |
|
| Griffbrettmaterial |
|
| Deckenholz |
|
| Anzahl der Bünde |
|
Möglicherweise sind hier Informationen zur Produktsicherheit verfügbar.





















