Thanks for shopping with Upper Room Music LLC and URGuitars.com. We are an authorized sE dealer and you will receive full factory warranty with this product.

sE7

A COMPACT & CLASSY CONDENSER

The sE7 is a high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications, from acoustic guitars to pianos to drums and beyond.

RECOMMENDED USE

Acoustic guitar, choir, orchestral + strings, piano, woodwinds, drums, percussion, cymbals / OH

HIGHLIGHTS

Optimized acoustic design, discrete class-A circuitry and a transformerless output

Clear, natural sound quality at all frequencies

Switchable -20dB attenuation pad

High sound pressure level (SPL) handling capability

Switchable low-cut 80 Hz filter

Extremely low-noise components

SE7 MATCHED PAIR

Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings.

Specs

Components

Capsule 1 / 2" Back-electret condenser capsule

Power

Electrical impedance <200 Ohms

Recommended load impedance >1k Ohms

Connectivity 3-pin male XLR connector

Powering 48V Phantom Power (P48 according to IEC 61938)

Sound

Polar patterns Cardioid

Frequency range 20 Hz - 20 kHz

Sensitivity 19 mV / Pa (-35 dBV)

Max SPL 136 / 156 dB (0 / 20 dB attenuation pad)

Equivalent noise level 16 dB

Dynamic range 120 / 140 dB (0 / 20 dB attenuation pad)

Signal to noise ratio 78 dB

Low-cut filter 80 Hz, 6 dB / Oct, switchable

Attenuation pad 20 dB, switchable

Current consumption 3.0 mA

Dimensions

Mic Diameter 23 mm (0.91 in.)

Mic length 120 mm (4.72 in.)

Mic weight 128 g (4.52 oz.)

What's in the box

2x sE7 microphones

2x mic clips (with thread adapter)

2x wind screens