Here's my Epiphone Inspired by Gibson Custom 1959 Les Paul Standard Reissue.

Purchased by myself from the Gibson Demo Shop here on Reverb it has 'DEMO' stamped on the reverse of the headstock.

It's in great condition other than the minor mark/scratch indicated on the seconds sheet (pictured). I've tried to capture this in the pictures but it's quite hard to see. It's more of a very light spec in the finish on the back of the neck. The case has a couple of scuffs to the front which I've tried to capture in the pictures. The case is good quality on these IGC Epi's, very solid.

This one weighs in at around 9.9lb (weighed on bathroom scales so this is approx) so has some weight to it, it feels like a chunky beast in the hands. The wood grain on the back of the body is lovely. The dark burst is nice and rich and has a kind of semi matt finish.

I've barely played this as I bought it chasing the Bluesbreakers vibe but I have an SG at home and find I'm more familiar and comfortable playing it. I've therefore decided to list this as I'm thinning down my collection to by a decent acoustic.

Sounds as you'd expect, great raw tones from the Custombuckers. Great pickups which pretty much make this guitar sing when soloing if you get your amp settings dialled in.

This model has the Gibson shaped headstock too which I prefer and was part of the reason I decided to buy it in the first place.

Very light bedroom use. No gigging and I've kept all original packaging/case candy. I'll ship it in the original box.

Here's the model's specs for reference:

Body

Top Material: Maple with AAA Flamed Maple Veneer

Body Material: Mahogany

Body Shape: Les Paul

Body Binding: Single-Ply Cream

Body Finish: Vintage Gloss

Neck

Neck Material: 1-Piece Mahogany

Neck Profile: 1959 Rounded “C” Medium

Neck Joint: Set (Long Neck Tenon)

Fingerboard Material: Rosewood

Fingerboard Radius: 12” (304.8 mm)

Fingerboard Binding: Single-Ply Cream

Fingerboard Inlays: Mother-of-Pearl Trapezoid

Scale Length: 24.75” (628.65 mm)

Fret Size: Medium Jumbo

Number of Frets: 22

Nut: Graph Tech

Nut Width: 1.69” (43 mm)

Hardware

Bridge: ABR-1 Tune-O-Matic

Tailpiece: Historical Aluminium

Tuners: Epiphone Deluxe (Single Ring Keystone Button)

Pickguard: Cream

Hardware Colour: Nickel

Electronics

Bridge Pickup: Gibson USA Custombucker

Neck Pickup: Gibson USA Custombucker

Controls: 2 Volume, 2 Tone

Pickup Selector: 3-Way Toggle

Electronics: CTS Pots, Black Beauty Capacitors, Switchcraft 1/4” Toggle Switch & Output Jack

Miscellaneous

Case: Epiphone Inspired by Gibson Custom Brown Hardshell (Included)

Factory Tuning: E Standard