Doepfer A-160-1 Clock Divider 1 - Standard

You are looking at the Doepfer A-160-1 Clock Divider 1. 

Doepfer’s A-160-1 is a frequency divider for clock/trigger/gate signals, designed to be a source of lower frequencies, particularly for rhythm uses. The Trigger input will take clock signals from, e.g., an LFO, MIDI sync, or the gate from a MIDI-CV interface.

At the outputs, you have access to the sub-divided clock signals, from half the clock frequency down to 1/64. The low/high levels of the output signals are 0V and about +10V.

The A-160 also has a reset input. Whenever a reset signal is sensed, all outputs are set to zero, until the reset voltage disappears.

The Clock Divider can be used in combination with the A-161 Clock Sequencer to produce stepped sequences with a length of from one to eight events. 

Features:  

Clock Divider

Power of 2 Divisions

Reset clock input 

Specifications: 

Dimensions: 

4 HP

40 mm deep

Current Draw:

 40 mA +12V

0 mA -12V

0 mA 5V