VFE Pedals Pinball v3 mid booster & tilt EQ - Bare Metal

This listing is for new, version 3 Pinball mid booster + tilt EQ pedal. It features a mode switch to toggle between mid booster mode (original Standout) and tilt EQ mode (original Pinball). It has an internal charge pump to maximize clean headroom.

Each of the Pinball/Standout pedals listed on my Reverb page are unique on the outside, but use the same exact circuit on the inside. The one pictured in this listing is the exact one you will receive.

LEVEL - controls the output of the pedal. There is PLENTY of clean boost on tap!
BLEND - in mid boost mode, this blends the EQ with a dry signal. In tilt EQ mode, it blends the HPF with the LPF.
HPF - varies the frequency cutoff point of the high pass filter(s), from 47 Hz to 4.0 kHz.
LPF - varies the frequency cutoff point of the low pass filter(s), from 230 Hz to 19.5 kHz
6dB/12dB - toggles between first-order (6dB) and second-order (12dB) filters.

MAKEUP - This internal trimpot sets the makeup gain between the HPF and LPF. Active only in mid boost mode.
BUFFER/TRUE - this internal switch selects between buffered and true bypass switching.
LED - This internal trimpot affects the brightness of the LED indicator.
DUALMODE - Wait 3 seconds and press tap + tap + hold for 3 seconds with the footswitch to activate or deactivate momentary mode.
POWER - Accepts the industry-standard 2.1mm pin, 5.5mm barrel, negative-tip power supply. The pedal accepts voltage ranges from 9V up to 18V.

FREE SHIPPING via USPS Priority inside the USA, $18 to Canada & $25 everywhere else with USPS 1st Class Mail (insured).

The buyer can return the pedal in the first 14 days for a full refund. All VFE Pedals include a 1-year warranty on parts & labor.