Lottery League x EarthQuaker Devices Avalanche Run™

Limited Edition Stereo Reverb & Delay with Tap Tempo

EarthQuaker Devices and the Lottery League have joined forces to produce a limited-edition version of the Avalanche Run stereo reverb & delay pedal. The pedal features exclusive artwork by Cleveland-based artist Clay Parker, whose extensive body of work adorns album covers, gig fliers and posters.

Each season the Lottery League brings together musicians from the Ohio region who are drafted into new bands that have never performed together before. The whole project culminates with The BIG SHOW where, after two months of creating and rehearsing, each of the newly formed bands performs their all-original sets to thousands of fans across three stages in a free festival that's truly unlike anything else. 

The Avalanche Run is a dreamy, stereosonic exploratory multi-tool that includes up to 2 seconds of delay time, reverse delay, tap tempo with subdivision control, switchable true-bypass or buffered bypass with 5 different tail lengths (including a sound-on-sound style lo-fi looping mode) and an assignable expression control that maps the expression jack to a control of your choice, including the toggle! The delay section allows tweaking from tape emulation to bucket brigade styles with a twist of the wide-range Tone control. The cavernous, plate-style reverb has just a touch of modulation with an adjustable Decay. Otherworldly reverse delay and dynamic swelling reverb settings are accessible through a 3-way toggle switch.

The Lottery League Avalanche Run is hand-built, hand-tested, and guaranteed for life.

Controls

Time: This controls the delay time and goes from 0ms to just under 2000ms.

Repeats: Controls the regeneration of the delay, from zero repeats to near infinite.

Tone: Controls the tone for the delay line only.

Mix: The is the volume control for the delay line. This blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up.

Expression Jack Assign Switch: Use this switch to map the expression jack to one of the assigned controls.

Ratio Selector Switch: Selects delay subdivisions when time is set by the “Tap” switch.

Decay: Controls the decay length of the reverb, short decay counterclockwise, long cavernous decay clockwise.

Toggle Switch (Mode Selector)

·Normal: This is the “standard” delay and reverb mode

·Reverse: This is reverse delay mode with “standard” reverb

·Swell: This is the volume swell mode

Mix: This is the volume control for the reverb. Blends in the wet with dry until 1 o’clock, 1 o’clock to 3 o’clock boosts the wet signal over the dry and 3 o’clock up brings down dry until it is fully wet when all the way up.

Tech Specs

Dimensions: 4.65 x 4.15 x 2.25 in. (118 x 105 x 57 mm) with knobs

Current Draw: 410 mA

Input Impedance: 1 MΩ

Output Impedance: 100 Ω

S/N Ratio: 115dB typical

24-bit 96kHz A/D & D/A converters

All analog dry signal path

All digital wet signal path with 20Hz – 20kHz frequency response

Expression Jack

The expression jack is located on the west side of the pedal. It is a TRS jack with the tip acting as the wiper.

Flexi-Switch® Technology

This device features Flexi-Switch® Technology! This relay-based, true bypass switching style allows you to simultaneously use momentary and latching style switching.

• For standard latching operation: tap the footswitch once to activate the effect and then tap again to bypass.

• For momentary operation: hold the footswitch down for as long as you’d like to use the effect. Once you release the switch the effect will be bypassed.

Since the switching is relay based, it requires power to pass signal.

Power

This device includes a power supply. It takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!

Lifetime Warranty

This device has a limited lifetime warranty. Should you encounter any issues, please visit the EarthQuaker Devices website.