lightly used (mostly clean with some imperfections) used Fulltone Distortion Pro DP-1 (2006) MISSING Bottom Label, + copy of Owner's Manual, battery, and strings (NO box)

NOTE: International customers please contact me first to find out if there are any shipping / delivery suspensions for your country.

At this time - all mail services to RUSSIA are not available.

• Click on the ALERT tab in this link:  usps.com/international/
  
• Also - this link has more info: click on the blue box VIEW THE SUSPENSIONS:  about.usps.com/newsroom/service-alerts/international/welcome.htm?_gl=1*niepl7*_ga*NDk5OTMyNjg0LjE2MzU3ODIwNTA.*_ga_3NXP3C8S9V*MTYzNjE1NDYzMC4zLjEuMTYzNjE1NDczMS4w%20In%20the%20above%20link-%20click%20on%20the%20blue%20box%20VIEW%20THE%20SUSPENSIONS

===

Up for grabs is a lightly used (mostly clean with some imperfections here & there and many imperfections on the BACK SIDE) FULLTONE Distortion Pro DP-1 from December 2006. 12/06

MISSING the Bottom Label.

Comes with a 9v battery and printout copy of the Owners' Manual. Also:

*** I am including one new set of D'Addario EXL-110 light (gauge 10) electric guitar strings. Please let me know if you prefer D'Addario EXL-120 super light (gauge 9) strings instead of the gauge 10 strings ***

The selling price will be $2 less if you do not need the battery and $3 less if you do not need the strings. Please make an offer with a message stating that you do not need any of these items. You can also message me if you prefer that these details be edited in listing.

Sorry NO box and NO original paperwork.

A printout copy of the Owner's Manual is included - but here's a link for it (in case you want to view it, download it, and / or print it):

• zikinf.com/manuels/fulltone-distortion-pro-manuel-utilisateur-en-44384.pdf

----------

The pedal was tested and works fine.

NO longer made. Great for collectors and / or for someone looking to buy this pedal to use.  Also great to give to someone as a gift!! Especially since it is mostly very clean!!😜!!

• TOP SIDE: Overall it is clean. The upper area has some light short and medium length horizontal scratches. The area to the left of the by pass switch has some short light scratches and a few tiny nicks.
• LEFT SIDE: Overall it is clean. It has a few tiny and a few very small nicks here & there.And it has a few very short dash scratches near the bottom edge. The area near the back screws has a few light very short dash surface scratches. And the upper mid to back are has a short light curved line scratch.
• RIGHT SIDE: The main areas are very clean with a few short scratches and a few tiny nicks on the front area. The back area has a few tiny / very small nicks. The mid to right area of the bottom edge has two very shrt dash scratches. The area below the jack has a few vey tiny nicks. And the ares near the middle screw has a few very tiny nicks & a few very short dash scratches.
• FRONT SIDE: The main areas are very clean. The lower right area has a few short hair-line scratches. The mid to right are of the bottom edge has two visible very small nicks.
• BACK SIDE: There are several visible not to light / not to deep scratches (some of these scratches go over the white Fulltone graphic, a very small nick, and thre are a few very tiny nicks on the back bottom edge.
• BOTTOM SIDE: Most areas are very clean. The upper ares has a couple of small cloudy spots. The lower edge of the battery compartment has a some very short light hair-line scratches. Here & thrre (morey near a few edge areas - there are a few tiny / very small nicks.
• MISSING the Bottom Label.
• INSIDE is very clean.
• HARDWARE (switch, nuts / washers, screws) are very clean. The BACK THUMBSCREW -- I went over this screw swth silver marker. I did this because there was some rust & oxidation on it. So the color of the back thumbscrews is a different color from the nickel color screws, nuts/ washers.
• KNOBS - are very clean

the controls are: Volume and Distortion.  Also:  Resonance, Voicing, Highs, Saturation.

NOTE: the circuit board has TWO INTERNAL TRIMMERS (the are blue square shaped). SEE picture # 5 and picture # 6 - you can also see them in pictures # 3, # 23, and # 24.

I'm not the original owner of the pedal - thererefore I don't know if the previous owner(s) made any adjustments with the Internal Trimmers. So I do not know if they are at the factory / ppreferred settings. I do not see any "small black pen mark notating Fulltone's preferred settings."

Where it is set at now is it's like a distortion.

I did sell a different Fulltone Distortion Pro (on REVERB) a while back and I still have pictures of it and I stlil have acess to that listing. On that pedal these were setting markings on the Internal Trimmers. So - if necessary- i can privide you with that info. Ju tmessage me.

In the link for the Owner's Manul (shown below) - on page 4 you can see the position of trimmer # 2 (the right trimmer) -- but you cannot really make out the position of Trimmer # 1 (the left trimmer).

• zikinf.com/manuels/fulltone-distortion-pro-manuel-utilisateur-en-44384.pdf

• The Manual states that they are factory set by Fulltone and "should not be mess with them unless you know what you're doing and have good reason to mess with them."
• Here's info about the Internal Trimmers:

Internal Trimmer Adjustments: Warning: these trimmers (located inside the pedal) are set by us at the factory and should not be messed with unless you know what you’re doing and have good reason to mess with them! You will find that each one has a small black pen mark notating our preferred settings.

Trimmer #1: regulates the amount of gain of the first stage in the circuit, rotating this trimmer CCW increases the gain. (increasing this setting may cause additional noise and/or hiss) If you are using humbuckers or higher-gained Pickups you may want to reduce the amount of gain here by turning it slightly CW if more clarity and definition is desired. (no more than 1/8 turn).

Trimmer #2: controls the overall maximum available Midrange and Distortion of the pedal...CCW increases the overall mids and Gain, CW decreases it. Please note that too much of this increases noise and lessens the pedal’s ability to clean up when the guitar’s volume knob is backed-off. In other words, we set it here and there’s no need for you to mess with it really!

the jacks are: INPUT, OUTPUT, and adapter jack

=========

The following is information about this model pedal:

Not a FUZZ! Designed to make a Tele, Strat, or other single coil-equipped guitar compete with a Les Paul, although many humbucker-users love it too. The DP-1 has great hi-gain sounds that are FAT and juicy. The "Saturation" knob allows you to soften or sharpen the attack of the notes and to firm the bottom-end. If you have a single-channel amp with a great clean tone then this is the pedal to get to add Marshall-like Lead tones without having to re-adjust the settings on your amp.

NOT A TUBE-DRIVEN PEDAL yet much more "tubey" sounding than many Tube-Driven pedals on the market!

Volume, Distortion, Resonance, Voicing, Hi-End and Saturation controls -- capable of turning the thinnest brightest amp you own into a 100 lb. violin.
========

I took pictures of all sides of the pedal.  There are a few pics of areas of interest and there are some pics of the inside of the pedal. And the first picture shows what it comes with.  Please message me (or make an offer) if you only want to buy the pedal or if you would like to buy the pedal with certain items presented in this listing.

Feel free to ask for more pictures.  

NOTE:   There may be some imperfections that I overlooked.   There are some imperfections that can be seen in person that do not appear in the pictures.  Also  - some imperfections show up in the pictures that are not that visible in person.

---

• Comes from a smoke free and pet free environment.
• Feel free to ask questions.  
• I will discount shipping on combined purchases!!

• USA Shipping is with USPS (with tracking).  
• International Shipping is with USPS First Class Mail International (with tracking).

CA Prop 65 Warning!
Everything sold into the state of California contains agents known to the state of California to cause cancer and birth defects, reproductive harm, or other, as yet unnamed, harm to its citizenry.