The Velocity 300 provides 150 watts/channel when used in stereo applications or 300 watts mono bridged into an 8 ohm load.

The Velocity 300 has a unique “Reactance” circuit that actually replicates the output impedance of tube amplifiers—so you can get the same great sound that a tube amplifier delivers in a reliable solid state design. And, because it is a variable control, you can customize your Velocity 300 to sound like any of your favorite tube amps. Best of all, this feature is available in the mono bridged mode too!

In addition, the Velocity 300 has “Definition” controls to give you that little bit of edge you need to bring your playing out in the mix. It also has automatic short circuit protection, which detects problems and shuts down the amplifier before any internal damage can be done.

Output Power (Unbridged): 150 watts per channel @ 4 ohms (both channel driven), 75 watts per channel @ 8 ohms (both channels driven), 37.5 watts per channel @ 16ohms (both channels driven)

Output Power (Bridged): 300 watts @ 8 ohms, 170 watts @ 16 ohms

Input Sensitivity: -7.3dBu (0.335V RMS), 4W stereo for rated output at max. gain

Maximum Input Level: 23dBu (10.95V RMS), input stage clip point

Input Impedance: 10KW

Maximum Input: +20dBu

Maximum Gain: 26dB

Dynamic Range: over 100dB

Frequency Response: ±1dB, 20Hz - 20kHz

Output Power: (both channels driven @ 1% THD) - 55 watts @ 4Ω, 40 watts @ 8Ω, 28 watts @ 16Ω

Power Consumption: 402 watts, 3.5A @ 115VAC

Maximum Output Level: 35dBu (4W bridged)

Maximum Gain: 36dB

Noise Floor: -75dBu typical (referenced to 1 watt)

Dynamic Range: 95dB

Distortion (Typical): 0.1% THD

Frequency Response: 20Hz - 20KHz, +0/-3dB

Current Consumption: 5 amps @115VAC max. (575 watts)

Dimensions: 19"x 1 3/4" x 9 1/2", 483mm x 44mm x 241mm

Weight: 18lbs, 7.80kg