This Guyatone electric bass has a smaller shape with a scale of approximately 770mm.
One humbucker type pickup gives it a soft tone sound. As for adjustments, the tone pot has been replaced due to a defective tone pot, and the wiring has been corrected.
Also, the string height is high, so it has been corrected by neck ironing and shimming.
In addition, the 4th string saddle spring has been installed, and the bent saddle screws have been corrected. (The groove is a bit crushed, so it takes a lot of force to turn it.)
The truss rod has been checked to 60 degrees left and right of the rod, and the frets still stand up to cutting but will be fretted low.
There are cracks on the body side and neck joint.

Item rank: B (average)

Truss Rod EEPlenty of room
Fret: 60-70%.
Attachment EESoft case / Non-genuine
Country of Origin EEJapan
Weight EE3.73kg
Serial EENo serial number

Truss Rod : No problem, rod is 60 degrees to the left and right.
Fretboard: Still can withstand cutting, but the frets are low.
String height(bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|38.0mm
Neck thickness(near 1st fret)|22.0mm
Neck thickness (near 12th fret)|26.3mm
SCALE|772cm (30.4")
RADIUS|254mm (10")
Strings for setup|Aria ProII AGS-600 / .045-.100 set
Repair and maintenance parts|Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, fret adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a single item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Fretboard Remaining
Note that the frets are low and can still withstand cutting.

String height (bass string side)
2.5mm above 12th fret

String height (treble string side)
2.0mm above 12th fret

Nut width
38.0mm

Neck Thickness (near 1st fret)
22.0mm

Neck Thickness (near 12th fret)
26.3mm

Scale
772cm (30.4")

RADIUS
254mm (10")

Strings for setup
Aria ProII AGS-600 / .045-.100 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, electrical repair, fret adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.

Reverb Buyer Protection

Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.

Listeda month ago
ConditionGood (Used)
Good condition items function properly but may exhibit some wear and tear.Learn more
Brand
Model
  • EB-25
Finish
  • 3.73Kg

Reverb Protection

Simple Returns, Secure Transactions, Human Support

Learn more

Secure Checkout

ISHIBASHI MUSIC

Tokyo, Japan
Sales:6,755
Joined Reverb:2016

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.