About This Listing

The Pignose Guitar is a unique and practical compact guitar based on the Pignose Amplifier concept.
It has a basswood body, pitched head design, and a micro-sized twin-bar humbucking PU.
Combined with the original micro amp and 10cm speaker, it produces a powerful drive sound unimaginable for its size.

* After our arrival, it has been cleaned and overall adjusted (string replacement, rod adjustment, octave adjustment, string height adjustment), so it is in good playing condition.
There are some minor scratches, but there are no noticeable flaws and it is in good condition.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories EESoft case / Genuine
Weight EE2.48kg
Serial : No

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|20.1mm
Neck thickness (near 12th fret)|21.5mm
SCALE|610mm (24")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.5mm

Neck Thickness (near 1st fret)
20.1mm

Neck Thickness (near 12th fret)
21.5mm

Scale
610mm (24")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.

Listeda month ago
Condition
Brand
Model
  • PGG-200 Sunburst
Finish
  • 2.48Kg

About the Seller

ISHIBASHI MUSIC

Tokyo, Japan
(3,753)
Joined Reverb:2016
Items Sold:6,755
Pignose Pignose PGG-200 Sunburst  (03/25)
Pignose Pignose PGG-200 Sunburst (03/25)
$295.78

About This Listing

The Pignose Guitar is a unique and practical compact guitar based on the Pignose Amplifier concept.
It has a basswood body, pitched head design, and a micro-sized twin-bar humbucking PU.
Combined with the original micro amp and 10cm speaker, it produces a powerful drive sound unimaginable for its size.

* After our arrival, it has been cleaned and overall adjusted (string replacement, rod adjustment, octave adjustment, string height adjustment), so it is in good playing condition.
There are some minor scratches, but there are no noticeable flaws and it is in good condition.

Item rank: B+ (Good)

Truss rod: There is enough room.
Fret: 60-70%.
Accessories EESoft case / Genuine
Weight EE2.48kg
Serial : No

Truss Rod : No problem, confirmed up to 60 degrees on both sides of the rod.
Fret height is sufficient.
String height(bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|42.5mm
Neck thickness(near 1st fret)|20.1mm
Neck thickness (near 12th fret)|21.5mm
SCALE|610mm (24")
RADIUS|305mm (12")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
No problem, rod is confirmed to be 60 degrees to the left and right.

Remaining frets
No problem, there is enough fret height.

String height (bass string side)
2.0mm above 12th fret

String height (treble string side)
1.5mm above 12th fret

Nut Width
42.5mm

Neck Thickness (near 1st fret)
20.1mm

Neck Thickness (near 12th fret)
21.5mm

Scale
610mm (24")

RADIUS
305mm (12")

Strings for setup
ERNIE BALL 2223 / .009-.042 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.

Listeda month ago
Condition
Brand
Model
  • PGG-200 Sunburst
Finish
  • 2.48Kg

About the Seller

ISHIBASHI MUSIC

Tokyo, Japan
(3,753)
Joined Reverb:2016
Items Sold:6,755

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.