About This Listing

This is a 1980 Rickenbacker "4001 Mapleglo".
Rickenbacker has been producing many guitars and basses since the 1950s and boasts a long history dating back to 1931.
This model 4001 bass is a representative model of Rickenbacker.
The body is made of maple, the neck is made of maple with through neck specification, and the fingerboard is made of rosewood.
The unique body shape is a feature of this model, and the tone obtained from the through neck is rich in sustain and high position tone with a thick Rickenbacker sound.

* After our arrival, it has been cleaned and adjusted (string replacement, rod adjustment, octave adjustment, and string height adjustment), and is in good playing condition.
The tralos rod is not fully tightened and the frets are low.

TONE knob cap and pickup fence are missing.
Overall, there are scratches, dents, and other signs of use. There are some parts with chrome peeling and chinks due to age.

Item rank: B (average)

Year of manufacture: 1980
Truss Rod EETightened
Fretboard: less than 50%.
Accessories EEHard case / Non-genuine
Country of Origin EEUSA
Weight EE4.22kg
Serial EETE 1699

Truss Rod: No problem with the neck at the limit of the rod.
Fret rests are defective and need to be replaced at the time of next repair.
String height (bass string side)|2.5mm above 12th fret
String height(treble string side)|2.0mm above 12th fret
Nut width|41.8mm
Neck thickness(near 1st fret)|22.8mm
Neck thickness (near 12th fret)|22.9mm
SCALE|846mm (33")
RADIUS|-
Strings used for setup|D'Addario EXL165 / .045-.105 set
Repair and maintenance parts|Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.

specs

Truss Rod
Note: There is no problem with the neck at the limit of the rod.

Fret remainder
Defective, need to consider replacing at next repair.

String Height (Bass String Side)
2.5mm above the 12th fret

String height (treble string side)
2.0mm above the 12th fret

Nut width
41.8mm

Neck Thickness (near 1st fret)
22.8mm

Neck Thickness (near 12th fret)
22.9mm

Scale
846mm (33")

RADIUS
-RADIUS

Strings for setup
D'Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment

*** The shipping cost to most countries is included in the listed price ***

All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.

Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.

Accessories: Please confirm the picture.

Precautions for electronic instruments that use a power supply

The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.

Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.

Listeda month ago
Condition
Brand
Model
  • 4001
Finish
  • 4.22Kg
Categories
Year
  • 1980
Fretboard Material
  • Rosewood
Body Material
  • Maple
Right / Left Handed
  • Right Handed
Active / Passive Pickups
  • Passive
Neck Material
  • Maple
Active Preamp
  • No
Finish Style
  • Gloss
Model Family
  • Rickenbacker 4001
Number of Strings
  • 4-String
Series
  • Rickenbacker 4000 Series
Pickup Configuration
  • SS
Color Family
  • Tan
  • Natural
Body Shape
  • Double Cutaway
Finish Features
  • Matching Headstock
Number of Frets
  • 20

About the Seller

ISHIBASHI MUSIC

Tokyo, Japan
(3,757)
Joined Reverb:2016
Items Sold:6,769
Product Overview
Initially developed as a deluxe, two-pickup upgrade to Rickenbacker’s 4000 bass, the Rickenbacker 4001 bass guitar has become a notable model for its long list of famous players. First released in 1961 with production lasting through the very early ‘80s, the 4001 has earned fans in bass players like Lemmy Kilmister, Kim Gordon, Rick James, Geddy Lee, and many, many more. The extra pickup was added to the 4001 to widen tonal possibilities and up the bass frequency response.
Shop 80 options from $2,199
Product Reviews

Reverb Gives

Your purchases help youth music programs get the gear they need to make music.

Carbon-Offset Shipping

Your purchases also help protect forests, including trees traditionally used to make instruments.

Oops, looks like you forgot something. Please check the fields highlighted in red.