Rotel Michi X5 Integrated Amplifier - Black

The Michi X5 Integrated Amplifier - Closeout Special $2000 Off!

• 350 Watts Per Channel at 8-Ohms / 600 Watts Per Channel at 4-Ohms of Class AB Amplification
• Oversized Toroidal Transformer (built in-house) feeds 88,000uF of high efficiency bulk storage smoothing capacitors with an isolated power supply.
• roon Tested & Certified 
• Supports MQA
• XLR Balanced Inputs
• 3x Digital Optical Inputs
• 5x Stereo Analog Inputs including Phono MM/MC

"At a cost of $6999 and weighing in at close to 100 pounds, the Rotel Michi X5 is a beast of an amp, but it is also a true beauty with performance befitting its luxurious price and build quality. The X5 may cost much more than a typical Rotel product, but considering what it has to offer, the price does not seem unreasonable. Compared to some of its competitors, it could be considered a bargain. With the X5, Rotel has produced an extremely accomplished, high-end integrated amplifier-DAC that continues their tradition of providing exceptional value."

Roger Kanno -Soundstage Hi-Fi

Rotel Michi X5 Specifications

• Continuous Power Output: : 350 watts per channel at 8-ohms | 600 watts per channel at 4-ohms
• Total Harmonic Distortion: < 0.009%
• Intermodulation Distortion (60 Hz : 7 kHz, 4:1): < 0.03%
• Frequency Responses: Phono Input 20 Hz-20k Hz (+0 dB, -0.2 dB) | Line Level Inputs 10 Hz-100k Hz (+0 dB, -0.6 dB)
• Damping Factor (20 Hz - 20kHz, 8 ohms): 350

Input Sensitivity /Impedance:

• Phono Input (MM) 5.7 mV / 47k ohms
• Phono Input (MC) 570 uV/ 100 ohms
• Line Level Inputs (RCA) 380 mV / 100k ohms
• Line Level Inputs (XLR) 580 mV / 100k ohms

Input Overload:

• Phono Input (MM) 197 mV
• Phono Input (MC) 19 mV
• Line Level Inputs (RCA) 12.5 V
• Line Level Inputs (XLR) 12.5 V
• Preamplifier Output Level / Impedance: 1 V / 470 ohms

Tone Controls:

• Bass ±10 dB at 100 Hz | Treble ±10 dB at 10k Hz

Signal to Noise Ratio (IHF “A” weighted):

• Phono Input (MM/MC) 80 dB | Line Level Inputs 102 dB

Channel Separation:

• Phono Input (MM) > 65 dB | Line Level Inputs > 65 dB

Digital Section:

• Frequency Response: 20 Hz - 20k Hz (0 ± 0.4 dB)
• Signal to Noise Ratio (IHF “A” weighted): 102 dB
• Input Sensitivity/Impedance: 0 dBFs / 75 ohms
• Preamplifier Output Level: 1.2 V (at -20 dB Volume Position)
• Digital to Analog Converter: Texas Instruments PCM5242 32-Bit / 768kHz
• Coaxial/Optical Digital Signals: SPDIF LPCM (up to 192kHz 24 bit)

PC-USB:

• USB Audio Class 1.0 (up to 96kHz 24-bit)
• USB Audio Class 2.0 (up to 384kHz 32-bit)*
• *Driver installation required

Power Requirements:

• 120 V, 60 Hz
• Standby Power Consumption-Normal: < 0.5 watts
• Standby Power Consumption-Network Wakeup: < 2 watts

Dimensions:

• 19" W x 7 5/8" H x 17 3/4" D
• Front Panel Height: 7”
• Weight (net): 96.56 lb