Zlob Modular Dual VCO

The Dual VCO is a 4hp Dual Voltage Controlled Analog Oscillator Eurorack Module available as a DIY Eurorack Kit, PCB and Panel, or Built.

Each VCO has square, triangle, and sine wave out, coarse and fine tuning controls, a control voltage input, and a switch for selecting exponential or linear cv in. When a control voltage is inserted, the fine tune control becomes an attenuator for the incoming voltage. In exponential mode, when the attenuator is fully clockwise, the VCO will track around 5 volts per octave.

the dual vco currently ships with the black/white pcb panel(if you want one assembled with an aluminum panel, add the additional panel to your cart)

FOR DIY KITS AND PCB/PANELS: ALL 3 SMD COMPONENTS COME PRE-SOLDERED 

• Width: 4hp
• Panel Material: PCB or aluminum
• Range: 0.2 hz (5 seconds a cycle) up to 18k hz
• Temperature compensated
• Waveform outputs 10vpp
• Reverse Power Protected
• Current Consumption: +12v 20mA, -12v 40mA
• Depth: 45mm
• Ships with M3 black nylon screws
• Build Difficulty: Advanced
• Expandable: no