Warmoth Vortex Roasted Maple / Rosewood Electric Guitar Neck, RH, Stainless Steel 6150 Frets, Wolfgang Neck Profile

PLEASE READ THE ENTIRE DESCRIPTION TO ENSURE COMPLETE COMPREHENSION OF LISTING. The exact item(s) and description(s) are listed as follows:

- Up for sale is a USED Warmoth Guitars Vortex model, Roasted Maple Electric Guitar Neck with a Darker Rosewood Fingerboard - for a 6-String Electric Guitar. This 3x3 tilt-back headstock, Right-Handed UNFINISHED neck has the standard Fender Stratocaster "curved" neck heel dimensions, and the 4 neck screw holes lined right up in my licensed Fender Stratocaster body, and it fit nice and snug into the neck pocket.

SPECS

• Darker Rosewood Fingerboard
• Roasted Maple Shaft
• Weight: 1 lb 2oz.
  
• 22 Stainless Steel "Medium, Jumbo" Frets SS6150
  
• Cream face dot inlays, cream side dot inlays
  
• Warmoth's Vintage/ Modern Construction dual action truss rod - Headstock tuning adjustment (wrenchkey not included)
• 25.5" Scale
• Warmoth's Wolfgang Asymmetrical Profile Shape
  
• .799" Thick at 1st fret, .96" Thick at 12th fret
  
• Weight: 1 lb., 2 oz. without tuners
  
• Tuner Holes: 10 mm
  
• Nut Width: 1.657"
  
• Heel Width: 2-3/16"
  
• Radius: Straight 12"
  
• Nut Slot has a Flat Bottom
• Graphtech Black TUSQ XL Nut, from Warmoth

- The frets on this neck are not leveled. The fretboard is carefully manufactured to have a straight and even radius but fret leveling and crowning may be necessary for low action setup. I DID HAVE TO DO SOME FRETWORK ON THE ENDS AS THERE WAS SOME SLIGHT FRETSPROUT. I USED THE PROPER FILES TO CORRECT THIS AND IT FEELS AND PLAYS GREAT BUT I DID NOT POLISH THE FRET ENDS.

- This neck is built with high quality tone woods.

- This neck does not require a finish if you prefer. This neck does not have a finish coat, further sanding may be required before a finish is applied. Sanded to a decent 220/300 Grit.

- There are barely any user marks on this neck. It is a raw neck, and there could be some minor ones, other than hardware marks (tuners, string tree, neck bolt holes). The frets are in immaculate condition, zero fret wear if any.

- I do have a great set of Chrome finished Grover 3x3 non-locking tuners I could part with, IF YOU WANT THEM, PLEASE MESSAGE ME AND ADD $30 to the total agreed sale price, however they do not have standard kidney buttons, they have the Chrome IMPERIAL buttons. Not a bad look, and they work really well. If I receive no message from the buyer, no tuners will be sent with the neck. What you see in the pics is what you get.

- All pictures included should show all the described conditions, and blemishes. Sadly, I must part with it at this time.

- Please ask any questions. I do not have an allen hex wrench key tool for the truss rod. Will be packaged extra securely.

- ALL OF THESE ITEMS ARE PACKAGED EXTRA SECURELY. ALL ITEMS SHOWN IN THE PICTURES ARE THE EXACT ITEMS YOU WILL RECEIVE IN THIS PACKAGE.

- Will ship to all 48 states within the USA only. No P.O. Boxes. If another payment method is requested, any info is requested, or any other pictures are requested, please contact me before buying. Local pickup is always offered. Thank You for looking!!!