This is a 1990 USA made ASAT Classic.
The current model has a 4-point neck plate, but this one has a Fender 70'-style 3-point neck plate.
The pickups are G&L's original Magnetic Field Design (MFD). It is characterized by its strong output and low noise.
Another feature is that the height of the individual pole pieces can be easily changed, which allows you to arrange the output strength of each string to your liking.
Spurzel pegs, 6-string saddle, 22 frets, and other features make this a traditional-style instrument that can be used in a wide range of situations.
* After it arrived at our store, it has been cleaned, adjusted (string replacement, rod adjustment, octave adjustment, string height adjustment), and fretted.
The truss rod has been fully tightened and the neck is currently warped, but we have adjusted it by fret adjustment.
The frets have been lowered accordingly.
There are scratches, small dents, and other signs of use.
Item rank: B+ (Good)
Year of manufacture: 1990
Truss Rod EETightened
Fretboard: 60-70% full
Accessories: Hard Case / Non-Genuine
Country of Origin EEUSA
Weight EE3.67kg
Serial EEG027309
Truss rod is defective and the neck is warped at the rod limit.
Fret remainder: note that the frets are low, but can still withstand cutting.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.4mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
Neck warps at the limit of the rod due to defects
Fret remainder
Note: The frets are low and can still withstand cutting.
String Height (Bass String Side)
2.0mm above the 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
41.4mm
Neck Thickness (near 1st fret)
20.7mm
Neck Thickness (near 12th fret)
23.0mm
Scale
648mm (25.5")
RADIUS
184mm (7.25")
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.
The current model has a 4-point neck plate, but this one has a Fender 70'-style 3-point neck plate.
The pickups are G&L's original Magnetic Field Design (MFD). It is characterized by its strong output and low noise.
Another feature is that the height of the individual pole pieces can be easily changed, which allows you to arrange the output strength of each string to your liking.
Spurzel pegs, 6-string saddle, 22 frets, and other features make this a traditional-style instrument that can be used in a wide range of situations.
* After it arrived at our store, it has been cleaned, adjusted (string replacement, rod adjustment, octave adjustment, string height adjustment), and fretted.
The truss rod has been fully tightened and the neck is currently warped, but we have adjusted it by fret adjustment.
The frets have been lowered accordingly.
There are scratches, small dents, and other signs of use.
Item rank: B+ (Good)
Year of manufacture: 1990
Truss Rod EETightened
Fretboard: 60-70% full
Accessories: Hard Case / Non-Genuine
Country of Origin EEUSA
Weight EE3.67kg
Serial EEG027309
Truss rod is defective and the neck is warped at the rod limit.
Fret remainder: note that the frets are low, but can still withstand cutting.
String height (bass string side)|2.0mm above 12th fret
String height(treble string side)|1.5mm above 12th fret
Nut width|41.4mm
Neck thickness(near 1st fret)|20.7mm
Neck thickness (near 12th fret)|23.0mm
SCALE|648mm (25.5")
RADIUS|184mm (7.25")
Strings in setup|ERNIE BALL 2223 / .009-.042 set
Repair and maintenance parts|cleaning, string change, rod adjustment, octave adjustment, string height adjustment, mortise and tenon adjustment
* The truss rod, remaining frets, string height, etc. are the setting values at the time of setup and adjustment at our repair center.
* This item is only available as a one-of-a-kind item.
We will try to delete the product information as soon as possible, but it is not always in real time.
specs
Truss Rod
Neck warps at the limit of the rod due to defects
Fret remainder
Note: The frets are low and can still withstand cutting.
String Height (Bass String Side)
2.0mm above the 12th fret
String height (treble string side)
1.5mm above 12th fret
Nut width
41.4mm
Neck Thickness (near 1st fret)
20.7mm
Neck Thickness (near 12th fret)
23.0mm
Scale
648mm (25.5")
RADIUS
184mm (7.25")
Strings for setup
ERNIE BALL 2223 / .009-.042 set
Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment, and rubbing
*** The shipping cost to most countries is included in the listed price ***
All musical instruments we sell have been checked and adjusted for playability. The pictures in the listings are of the actual item so please have a look for an idea of the cosmetic condition. As they are used instruments they may or may not have some scratches or wear to the finish. Please note: Ishibashi will not accept returns or refunds in the case of dents, scratches, or cosmetic wear that were orignally detailed either in the pictures or description. Thank you for your understanding.
Condition: Some scratches, dents and marks. If you would like to know more about this specific instrument, or have general questions, please don't hesitate to contact us.
Accessories: Please confirm the picture.
Precautions for electronic instruments that use a power supply
The voltage in Japan is 100 V, it is different from most of other countries, you need confirm the voltage of your country and in some cases you have to get locally an adaptor for converting the voltage before use it in your country.
Please note!
Not all of the items you purchase from us are in our Shibuya store in Tokyo where we do all of our international communications from. Please be patient while we do inter-company transfers on your items. Once the item arrives here, we will check it over one more time before shipping it out. The usual wait time for our shipping is 7 to 10 days worldwide. We are open from Monday to Saturday 11:00am until 6:00pm (Tokyo time zone) 6 days a week, closed on Sunday.** Please note that all items for sale on here are also available at our retail stores in Japan. There is a chance that they may sell out in our retail location beforehand. We update our information daily, but there is still a chance this may occur. In this event we will cancel the order and refund any payments received. Thank you for your understanding.
More information please confirm our shop policy.
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
Listed | 2 months ago |
Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
Brand | |
Model |
|
Finish |
|
Year |
|
Pickup Configuration |
|
Color Family |
|
Right / Left Handed |
|
Fretboard Material |
|
Number of Strings |
|
Body Type |
|
Bridge/Tailpiece Type |
|
Body Shape |
|
Neck Construction |
|
Number of Frets |
|