AMT Electronics Pangaea U-2 | Multi-FX Pedal. New with Full Warranty!

The firmware that turns the device into a powerful stereo IR impulse responses cabinet emulator.

• IR Stereo cabsim (2 IR’s per preset: the first wav IR for the LEFT channel, another one wav IR – for the RIGHT channel)
• Parametric Pre/Post EQ
• Hi/Low pass filters + Presence

04 - Stereo Delay

Multifunctional STEREO IN/OUT Delay effect.

05 - Stereo Reverb

Multifunctional STEREO IN/OUT Reverb with the following types:

• Gold Reverb
• Hall
• Room
• Plate
• Spring
• Gate
• Reverse

06 - Pre/Post FX

The firmware that turns the Ultima U-2 device to the PRE / POST effect processor.

PRE section:

• Noise Gate (global setting)
• Compressor
• Phaser
• Resonance Filter (wah-wah etc.)
• Flanger

POST section:

• IR cabsim (1 IR for both L/R channels per preset)
• Parametric Pre/Post EQ
• Hi/Low pass filters + Presence
• Delay or Reverb effect per preset
• + other features

SPECIFICATIONS

IN L, IN R – Inputs of the Left and Right channels:
– input impedance 470 kОм
– rated input voltage of audio signal 0.316Vrms (-10dBV)
– maximum sinusoidal voltage 2.5V (+8dBV)

AUX IN
– Input impedance 2kOhm
– maximum sinusoidal voltage 0.85V (-1.4dBV)

OUT L, OUT_R – Outputs of the Left and Right channels:
– output impedance 1,5kOhm (unbalanced output)
– maximum sinusoidal voltage 2,6V (unbalanced output)
– phantom power protection – present

PHONES – Output to headphones:
– minimum headphone impedance 32 Ohm
– maximum output sinusoidal voltage (no load) 2,6V (8dBV)
– output impedance 12 Ohm

POWER
– Voltage DC 12V
– Current consumption Approx. 300mA

CHARACTERISTICS OF IR FILES
– Type: WAV, IR A/D – D/A converters 24 bit
– Sampling frequency: 48 kHz
– IR length: 1024 samples (21.3 msec)

– S/N: 115dB.
– Latency: 1.2 ms / 0.0012 s
– Codec: AD\DA AK4621

DIMENSION (HxWxD) 47mm x 55mm x 95mm

WEIGHT 270 g (without package)