Tung-Sol etc. ONE (1) 6SL7WGT dual triode tNOS AT1000 TESTED Vacuum Tube Military 6SL7 JAN rugged premium 1941-1975

This listing is for one (1) 6SL7WGT dual triode 6SL7 JAN rugged premium vacuum tube in the straight-walled glass tube shape. It has a black bakelite octal base, black or grey plate, and foil or square bottom or halo side or top getter. Labels in stock include Tung-Sol, GE, Raytheon. Some of our stock is re-labeled or marked with the OEM of Reliatron. If you're looking for a particular brand, please message right as you order - we pack and ship quickly!

NOTE: missing center pin. You can see where it was, and line it up appropriately. Adds 20 seconds to your tube swap-out time.

Your tube has been fully tested on a computer-regulated, USA-made Amplitrex AT1000 on Fixed Bias setting with like new, NOS results (tNOS). Here's what that means: to qualify for this listing, several stringent conditions must be met: The transconductance for each section must measure between 1280 uMhos and 1920 uMhos, consistent with original 1941 RCA, Western Electric, Sylvania, GE, and/or Tung-Sol datasheet specifications for new tubes of this type. The tube must also show no shorts, show a gas current less than 0.23 mA, and a heater-to-cathode leakage of less than 10 microamps (10 uA). The tube might have mechanical wear or have the label rubbed off - these are very old! Used-testing tubes are available in a separate listing at a significant discount. Every tNOS or Used Good tube you receive from Sound By Doc is guaranteed against failure for 60 days after purchase, an industry extreme!

These photos are not stock photos. You are looking at the actual tube you will receive. If a box or boxes are in the photos, you will get them. If test results appear in the photos, look close, because those are the test results of the tube you will receive! SKU 6SL7-m. Please note that matching is nearly always possible for us from stock that is inventoried but not yet listed. If you need a matched pair or quad etc., please use the make-an-offer feature through Reverb. Matching requires an extra burst of effort, so please add $5 per tube to your offer for 10% matching and $10 per tube for 4% matching. [Matching is based on plate current for power tubes, voltage drop for rectifiers, and GM for all other tubes. If you also require the label or internals to match, please specify that in your offer.]