Elvertronics 3XVCA Triple VCA (Noise Reap Design)
This piece of gear has sold
View similar gear from other sellers on Reverb
Watch this gear and we'll notify you if it becomes available again.
Freshly built take on the 3XVCA originally designed by Noise Reap. Power cable included.
I think these modules are interesting and will be bringing some of them back into production. Per Noise Reap's open source policy this does not have their brand name on the panel, and 10% of net proceeds will benefit Camphill Hudson (a provider of supports to adults with developmental disabilities here in Hudson).
About the module:
Overview
3xVCA is a trio of VCAs. They have a linear response to CV input, and are equally suited to
controlling the amplitude of audio or CV signals.
The VCAs are made using no special ICs. Rather each is made with matched transistors and
0.1% components.
Technical Specifications
- Width 6hp
- Depth 28mm
- Current draw 20mA @ +12V
- Current draw 30mA @ -12V
Inputs
IN
+/-10V range. DC coupled. 100K impedance. These are the main inputs for the signal to be
manipulated.
The IN jacks are normalled together from the top down. For instance, a signal patched to the top
IN will be present at all three OUTs. Patching into a lower IN will break this normalled
connection.
CV
+/-10 range. DC coupled. 100K impedance. The voltage applied here controls the gain of the
VCA. A positive signal increases gain, and a negative signal decreases gain. A +5V signal
opens the VCA to unity. A max gain of 1.6 is possible if CV is applied “on top” of a fully
clockwise LEVEL control.
Outputs
OUT
21.5V headroom. 1K impedance. The main output of the VCA. Low CV bleedthrough.
Theoretical harmonic distortion around 1%.
Knobs
LEVEL
This control serves two related functions - attenuation & gain.
Rotating clockwise from noon increases the gain of the VCA. LEVEL fully clockwise
corresponds to a gain of 1 or unity. A max gain of 1.6 is possible if CV is applied “on top” of a
fully clockwise LEVEL control.
Rotating counter-clockwise from noon subtracts or attenuates the CV input. Rotating fully
counter-clockwise will completely null the channel even with a strong 10.5V envelope applied.
Using with…
LFOs
A standard +/-2.5V LFO will fully open and close the VCA with the LEVEL knob around 2 - 3
o’clock.
Envelopes
With LEVEL at noon, a standard 8 to 10V envelope will increase gain beyond unity. If this is
undesirable, or if clipping occurs, trim the incoming CV by rotating the LEVEL control to around
10 - 11 o’clock.
| Condition | Brand New (New) Brand New items are sold by an authorized dealer or original builder and include all original packaging.Learn more |
| Brand |
|
| Model |
|
| Categories |
