Conway Craftings Wooden Painted White Oak Wood Pedalboard 2023 Gray Paint, Van Dyke Brown Glaze, Sat

This beautiful pedal board is an excellent way to bring some organization to your pedal cluster. Great for all musicians who use effects pedal for their rig.

This particular pedalboard was constructed with White Oak Wood. It measures in at 26" wide, 14" deep, 3.75" tall (back), 1.5" tall (front). It was wire brushed to deepen the grain patterns and then finished with a gray paint, followed by a Van Dyke Brown glaze, and a varnish topcoat. The board is a solid piece of Ply with 2 slots cut out for fishing wires and cords underneath for great concealment. On top is actual pedal board fabric adhered to it, allowing for the use of Velcroe or other hook and loop fabrics, for attaching pedals. Handles are installed for and easier way to carry it around. Power supply IEC inlet plug in picture is included, where a simple power cord (not provided) can be plugged straight in to it. Connected to that is an IEC pigtail which is mounted underneath the pedal board, and is also included. These will plug directly in to most power supply bricks, but make sure to check and see that your power supply is powered by an IEC plug. Next to the plug are 2 locking 1/4" jacks for your instrument and patch cables, which are also included. Rubber feet have been attached on the bottom of the board for more stability, so that it'll stay in place during use. A wooden Logo is attached on the opposite side of the jacks and plugs on the pedalboard, leaving the front as the most visually appealing side from where everyone else sees it.

It is recommended to purchase wire clamps (as used in picture to mount the power splitter), 1/2 screws for clamps, and zip ties separately from your local hardware store. Doing so will help you organize and conceal your wire clutter underneath.