Nitorlack Water Based Dye Black 480049112 Nitoraqua Stain Black

Concentrated Water-Based Dye for electric guitar - Nitorlack

Color: Black

NitorAqua Stain water-based stains are very easy to apply by hand. with a small sponge or a small sponge.

They are water-based stains that bring out the colour between the hard and soft parts of your guitar’s wood. as well as highlighting the pore in woods such as ash.

Highlight Flamed and Quilted effect woods and get 3D effects.

Once applied. the guitar can be finished with any of Nitorlack’s products. whether water-based. nitrocellulose or polyurethane.

250 ml Plastic Bottle

With NitorAqua Stains you can get the colours of the TOP brands of guitars and give that 3D effect in Flamed and Quilted woods. highlighting in them the transparency and resistance to light that we obtain.

You can mix them together and get Burst effects and double tints. The only limit is your imagination with these stains.

• How to apply the stain to the wood of your guitar:
• Prepare the guitar with P240 sandpaper until the surface is smooth.
• Dampen the surface of the guitar with water and let it dry to remove the peeling.
• Sand with P400 sandpaper to remove the paint and leave the guitar ready for application.
• We cover with masking tape the surfaces that we do not want to stain.
• VERY IMPORTANT: Shake the can well before loading the sponge or the sponge cloth.
• Put 4 or 5 drops of dye on a small piece of sponge and apply it directly on the guitar. Spread it well by making longitudinal movements all over the guitar until the dye is perfectly distributed.
• Work in sections. e.g. start from the lowest side and work upwards. Apply from the centre of the section outwards to avoid spilling over the sides.
• If we want more colour intensity we can apply another coat of stain. sanding lightly with P400 beforehand.

• Optional:
• Apply a second coat to intensify the colour.
• For a double stain. let the first coat dry for at least 30 minutes. sand until the stain is in the most open grains or until desired. Apply a second coat of stain.
• For a two-tone dual dye. normally the darker colour is applied first.
• For a burst effect the lighter colour is applied first.

Made in Europe

Click on image for details