Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn More
Straight neck and low action, frets are in good shape and electronics work quietly and properly.
From what I can find out, these are made by a luthier in the UK. Possibly for the Japanese market?
Please review photos for condition and thanks for looking.
Inspected, setup, thoroughly tested and gig ready!
From the website-
Body shape
Top and Back Slim-line MDG-800 Bolt on Body shape.
Wood
2-Pcs glue Alder wood.
Thickness
45mm
Neck
3-Pcs glue hard maple
Thickness
1-Fret: 19mm, 12-Fret: 21mm
Head
MDG-800 Angled shape
Fingerboard
India Rose wood
FB-Width
NUT: 42mm (Black) 24-Last fret: 56mm
FB-Radius
15-Inch (380mm) radius
Scale
25.5 Inch
Fret
24-Silver frets, Width: 2.7mm
Top-Inlay
White Dot 6mm
Side-Inlay
White Dot 1.5mm
Neck-PU
Single Black (S-20S) Standard coil
Middle-PU
Single Black (S-20R) Reverse turn Coil
Bridge-PU
Open Humb (OHD-20R)
Controls
1-Volum, 1-Tone, 1-5 way PU Selector SW 1-Coil tap SW
Bridge PU-Single/Humb Control
Knobs
Dome type Black
Machinhead
Diecast type (DGK-07)
Tailpiece
VFT-2 Tremolo
2-Pivot posts with bushings.
A few ♪ 'notes' ♫ from the shop:
Our number one goal is to have an honest, pleasant and mutually beneficial experience for you and for us. We've done our very best to represent the item(s) as accurately as possible through pictures and descriptions. But, assessing playability, sound and condition can be very subjective so PLEASE don't hesitate to contact us with any questions you may have about any of our listings. Let's make sure we're on the same page BEFORE you buy. Thanks for stopping by. We look forward to working with you!
We will refund any difference between charged and actual shipping,
Proud to be a Reverb Preferred Seller, Quick Shipper and Quick Responder!
| Listed | 9 months ago |
| Condition | |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Body Shape |
|
| Right / Left Handed |
|
| Body Type |
|
Straight neck and low action, frets are in good shape and electronics work quietly and properly.
From what I can find out, these are made by a luthier in the UK. Possibly for the Japanese market?
Please review photos for condition and thanks for looking.
Inspected, setup, thoroughly tested and gig ready!
From the website-
Body shape
Top and Back Slim-line MDG-800 Bolt on Body shape.
Wood
2-Pcs glue Alder wood.
Thickness
45mm
Neck
3-Pcs glue hard maple
Thickness
1-Fret: 19mm, 12-Fret: 21mm
Head
MDG-800 Angled shape
Fingerboard
India Rose wood
FB-Width
NUT: 42mm (Black) 24-Last fret: 56mm
FB-Radius
15-Inch (380mm) radius
Scale
25.5 Inch
Fret
24-Silver frets, Width: 2.7mm
Top-Inlay
White Dot 6mm
Side-Inlay
White Dot 1.5mm
Neck-PU
Single Black (S-20S) Standard coil
Middle-PU
Single Black (S-20R) Reverse turn Coil
Bridge-PU
Open Humb (OHD-20R)
Controls
1-Volum, 1-Tone, 1-5 way PU Selector SW 1-Coil tap SW
Bridge PU-Single/Humb Control
Knobs
Dome type Black
Machinhead
Diecast type (DGK-07)
Tailpiece
VFT-2 Tremolo
2-Pivot posts with bushings.
A few ♪ 'notes' ♫ from the shop:
Our number one goal is to have an honest, pleasant and mutually beneficial experience for you and for us. We've done our very best to represent the item(s) as accurately as possible through pictures and descriptions. But, assessing playability, sound and condition can be very subjective so PLEASE don't hesitate to contact us with any questions you may have about any of our listings. Let's make sure we're on the same page BEFORE you buy. Thanks for stopping by. We look forward to working with you!
We will refund any difference between charged and actual shipping,
Proud to be a Reverb Preferred Seller, Quick Shipper and Quick Responder!
| Listed | 9 months ago |
| Condition | |
| Brand | |
| Model |
|
| Finish |
|
| Categories | |
| Body Shape |
|
| Right / Left Handed |
|
| Body Type |
|
