Focal Solo6 ST Monitor Speaker Pair - not currently in stock, place your preorder

2-WAY MONITOR

Made in France, the Focal Solo6 ST is a 2-way monitor offering unrivalled transparency, definition control, dynamics and soundstage precision.

 
With its full-range Focus Mode, Solo6 ST forms two monitors in one, preserving the sweet spot during the mix, saving space on the console and simplifying cabling and monitor changes.

In terms of technologies and performance, Solo 6 ST boasts an inverted dome Beryllium tweeter with an ‘M’-shaped protective grille, and a woofer with a ‘W’-shaped cone, as well as a frequency range of up to 10 kHz, specially designed for the Focus Mode. All this on top of Focal’s patented Tuned Mass Damper (TMD) technology, which reduces distortion in the 1kHz – 3kHz frequency range by 50%, as well as a high-pass crossover, a disengageable automatic standby mode and a 160Hz crossover for reflections from consoles – making Solo6 an industry-leading monitor.

Finally, to enjoy immersive listening experiences with Dolby Atmos® and Sony 360RA® installations, Solo 6 ST includes inserts for attaching it to the wall and ceiling.

The Focus Mode enables the loudspeaker to be converted into a one-way full-range monitor, providing a different speaker driver configuration accessed by simply pressing a pedal – as though there were a second pair of studio monitors with a reduced dynamic allowing the mix adaptability to be checked on smaller systems. 

Solo6 ST RED includes a variable high-pass crossover and a 160Hz parametric crossover to reduce reflections caused by the console or desk. These monitors are also equipped with a high-pass crossover and a disengageable automatic standby mode, accessible via a switch and offering a simple and essential option for controlling the loudspeaker.

The ‘W’ composite cone is made in France by Focal and allows the frequency response curve to be perfectly optimised. This cone’s unique characteristics of lightnend rigidity control the signal transmission speed within the material. The modulation of the structural foam’s thickness provides very precise control of the cone’s damping quality. When you’re listening, it creates total sound transparency, a very low distortion rate and an excellent phase response.

The design of the cabinets in the ST6 line uses a thick and robust material, allowing ever greater rigidity and damping to be achieved, with fewer vibrations and therefore less distortion.

Key points

• Beryllium inverted dome tweeter: very low directionality, excellent linearity and dynamics
• Optimised baffle tweeter: excellent dispersion control
• Composite sandwich ‘W’-cone: sound neutrality, no distortion
• Focus mode: two monitors in one; 2-way monitor and 1-way full-range monitor (woofer alone) • Large laminar port: no port noises or distortion

• Inserts for wall fastening
• Automatic disengageable stand-by mode
• Settings: activatable/deactivatable, LF shelving, HF shelving, LPF @ 160Hz

Type

2-way monitor

Frequency response (@ -3dB)

45Hz - 40kHz

Low cut-off frequency (@ -6dB)

40Hz

Focus mode

110Hz - 10kHz

Maximum SPL
(Average CEA2034 50–10kHz free field @ 1m)

110dB

Focus mode (Average CEA2034 100–10kHz free field @ 1m)

109.5dB

Input

Balanced XLR 10 kΩ

Bass amplifier stage

80W RMS

Treble amplifier stage

50W RMS

Nominal power supply

~100-120 VAC/220-240 VAC 50/60Hz

User controls

Sensitivity, stand-by HPF, LF Shelv, LMF EQ, HF Shelv

Fuses

~100-120V, T2.5AL/250V ~220-240V, T1.25AL/250V

Bass

6.5" (16.5cm) “W” cone

Treble

1.5" (38mm) Beryllium

Shielding

no

Construction

7/8" (22mm) MDF

Finish

Dark red natural veneering side panels, black body

Dimensions (HxWxD)

131/8"x93/4x115/8" (33.4x24.6x29.5cm)

Weight

28.6lbs (13kg)

Temperature range

During use: 5-35°C In storage: 0-50°C

Wall mounting

K&M® 24471 fixing kit + K&M® 24359 adapter

Ceiling mounting

K&M® 24496 fixing kit K&M® 24491 fixing kit + K&M® 24359 adapter