Ampeg SGT-DI Bass Preamp Pedal and DI
The Ampeg SGT-DI combines a bass preamp, Super Grit Technology overdrive, compressor, cabinet impulse response loader, and DI in one pedal. Shape your sound with SVT and B15 voicings, a 3-band EQ with sweepable mids, and Ultra-Hi and 3-way Ultra-Lo switches. Connect to an amplifier, send a cabinet-simulated signal to a mixer or recording interface, or use the Aux/Headphone section for practice.
Tone-shaping Features- Footswitchable preamp with 3-band EQ and sweepable mids
- Footswitchable SGT overdrive circuit with SVT and B15 voicings
- Ultra-Hi and 3-way Ultra-Lo switches
- Variable 10:1 compressor
- Onboard cabinet IR loader with three fixed factory slots and three replaceable user slots
- Aux/Headphone section
- Balanced XLR DI output with ground lift
A cabinet impulse response captures the tonal characteristics of a recorded speaker cabinet and recording setup, allowing you to change cabinet sounds without changing physical cabinets. The SGT-DI ships with six preloaded Ampeg cabinet IRs:
- Cab mode: Heritage B-15, Heritage SVT-410HLF, and SVT-810 Squareback
- User mode: SVT-112AV, SVT-210AV, and SVT-212AV, which can be replaced with your own IRs using the free Ampeg IR Loader application
Cab Level adjusts the output level of the selected cabinet IR, with a separate level setting saved automatically for each IR. It is an output-level control, not a wet/dry blend. Cab/User IR processing applies only to the XLR Direct Out and Line/Phones outputs. The middle Off position bypasses cabinet IR processing.
Connections and Routing- 1/4-inch instrument input
- 1/4-inch Thru output for a dry, instrument-level signal, such as to a tuner or parallel effects chain
- 1/4-inch TS Preamp Out carrying the compressor, preamp, and SGT signal without cabinet IR processing
- Balanced XLR Direct Out carrying the compressor, preamp, and SGT signal, plus the selected cabinet IR when enabled
- Ground/Lift switch for the XLR Direct Out
- Aux input and Line/Phones output for practice and monitoring
- Power requirements: External 9V DC, 500mA, center-negative; use the included adapter
- Product weight: 1.9 lb / 0.85 kg
- Product dimensions (H × W × D): 2.5 × 7.4 × 4.9 inches / 65 × 189 × 126 mm with side-panel knobs recessed and no rubber feet applied
- Width with side-panel knobs extended: 7.9 inches / 201 mm; height and depth unchanged, with no rubber feet applied
- Ampeg SGT-DI pedal
- USB-C cable
- 9V DC, center-negative, 500mA power supply
- Adhesive rubber feet
- Cheat Sheet and Quick Start Guide
| Condizione | Nuovo (Nuovo) Gli articoli "Nuovi” sono venduti da un rivenditore autorizzato o dal produttore originale e comprendono l’imballo originale.Scopri di più |
|---|---|
| Marchio | |
| Modello |
|
| Categorie | |
| Formato pedale |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.


