Pioneer Model QX-8000 Quadraphonic 4 Channel Stereo Receiver
Pioneer Model QX-8000 Quadraphonic 4 Channel Stereo Receiver
Shipping only to the lower 48 states and residential or commercial addresses. No shipping to HI or AK or PO boxes
Great receiver in excellent condition.
Tested each of the 4 channels and all are working as is the AM/FM section, phono and aux input.
All controls and switches are working volume, right and left and front and rear balance controls, tone and all others. Recently cleaned.
Very clean case and face plate but one speaker indicator lamp, front left, is not working (see first photograph).
The main panel lights have been replaced with new LED's that should last the life of the receiver.
Specifications:
Tuning range: FM, MW
Power output: 25W/ch (stereo), 20W/ch into 8Ω (quadraphonic)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 1%
Damping factor: 35
Input sensitivity: 2mV (MM), 170mV (line)
Signal to noise ratio: 75dB (MM), 90dB (line)
Output: 170mV (line), 0.4V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 1 x FET, 2 x IC, 65 x transistors, 27 x diodes
Dimensions: 509 x 172 x 377mm
Weight: 15.6kg
Year: 1971
Shipping only to the lower 48 states and residential or commercial addresses. No shipping to HI or AK or PO boxes
Great receiver in excellent condition.
Tested each of the 4 channels and all are working as is the AM/FM section, phono and aux input.
All controls and switches are working volume, right and left and front and rear balance controls, tone and all others. Recently cleaned.
Very clean case and face plate but one speaker indicator lamp, front left, is not working (see first photograph).
The main panel lights have been replaced with new LED's that should last the life of the receiver.
Specifications:
Tuning range: FM, MW
Power output: 25W/ch (stereo), 20W/ch into 8Ω (quadraphonic)
Frequency response: 5Hz to 100kHz
Total harmonic distortion: 1%
Damping factor: 35
Input sensitivity: 2mV (MM), 170mV (line)
Signal to noise ratio: 75dB (MM), 90dB (line)
Output: 170mV (line), 0.4V (Pre out)
Speaker load impedance: 4Ω to 16Ω
Semiconductors: 1 x FET, 2 x IC, 65 x transistors, 27 x diodes
Dimensions: 509 x 172 x 377mm
Weight: 15.6kg
Year: 1971
Protezione di Reverb per gli acquirenti
Reverb ti protegge nel caso in cui il tuo articolo venga perso, danneggiato o non corrisponda alla descrizione. Basta segnalare eventuali problemi entro 7 giorni e ti aiuteremo a ottenere il rimborso completo.Scopri di più sulla Protezione di Reverb per gli acquirenti.
| Pubblicato | 9 anni fa |
|---|---|
| Condizione | Molto buono (Usato) Gli articoli "Molto buoni" possono mostrare qualche piccolo segno o graffio ma sono pienamente funzionali e in buone condizioni generali.Scopri di più |
| Marchio | |
| Modello |
|
| Categorie | |
| Anno |
|
| Prodotto in |
|
Le informazioni sulla sicurezza del prodotto sono disponibili qui.

