- USB Audio interface: high-performance converters enable allowing you to record, mix and play back audio in studio quality at up to 24-bit/ 192kHz, give your recordings clarity and distinction.
- Guitar audio interface: support plug a guitar or bass its high headroom will let you record without distortion or clipping. Both of inputs have Gain Halo meters, which makes it easy to set input levels.
- XLR audio interface with phantom power Mic preamplifier inputs are on the front panel: Input 1 uses a standard 3-pin XLR socket,and can work with most types of microphones; you will need a male XLR connector on the end of your mic cable.
- Mic audio interface Both of inputs have Gain Halo meters, which makes it easy to set input levels. And also has balanced outputs, which means when you connect them to monitors or an amplifier with balanced inputs, your audio will be protected from any hum or interference.
- Computer recording audio interfaces supports free warranty. If you have any questions, please contact the seller\'s customer service.
Product Description
RuiPuo high-quality audio(24Bit/96kHz) An all-encompassing recording companion for use at home or in the studio, capture crystal-clear vocals and track a range of instrumentation with the easy-to-use dual input.
Compatible with MacOSX and Windows, build your songs and monitor your recordings with active speakers or headphones in real-time with zero-latency.
Compatible with recording software: Cubase, Logic Pro, Reaper, Reason, Ableton Live, ProTools, FL Studio, Studio One, Audition
NOTE: Please install the ASIO4ALL driver before using the above recording software.
Mic audio interface Both of inputs have Gain Halo meters, which makes it easy to set input levels.
Also has balanced outputs, which means when you connect them to monitors or an amplifier with balanced inputs, your audio will be protected from any hum or interference.
- The USB audio interface supports use on Windows / Mac / Android operating system.
- Does not support iPad / iPhone.
- Does not include software or DAW.
¼” TRS output jack. If your headphones have a ¼” TRS jack plug, connect them directly;
If they have a 3.5 mm TRS “mini jack”, use a TRS ¼” -to-3.5 mm jack adaptor. Note that it is likely that headphones fitted with 4-pole TRRS plugs will not operate correctly.
- 48V fantasy power input jack: electronically balanced input via 3-pin XLR socket, which is compatible with most types of microphones.
- If the microphone and the instrument input are used at the same time, the two inputs will be added in mono.
- 6.35mm headphone output jack: monitoring of input signals to be directly.
- 2 x ¼” (6.35 mm) TRS jack sockets connect to powered studio monitors.
- Allows zero-latency monitoring, and directly control all internal recordings and settings.
- Supported sample rates：44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
Successfully connect the device to your computer by using a USB data cable. (1) Windows
Step 1: Connect this product with computer via USB cable;
Step 2: Open device manager;
Step 3: The selected \"Sound,video and game controllers\" shows the device
name \" USB ADVANCE AUDIO DEVICE \" of the product.
(2) Mac OS
Step 1: Open the settings in the Mac OS System Prefrences;
Step 2: Find the sound;
Step 3: Select the device\" USB ADVANCE AUDIO DEVICE \" for sound input.
Mac OS System Monitor
When you need to monitor through this product, open the settings in the Mac OS System Prefrences, find the sound, and then select the device \" USB ADVANCE AUDIO DEVICE \" for sound output.
Not working after connecting?
- Try replacing the USB-C cable and retest the connection ensuring a firm connection is present.
- Check if your operating system (Mac OSX or Windows) requires additional drivers. For use with most recording software, You could try installing driver ASIO4ALL.
