Marshall JTM 30 - Made in England, with upgrades!
A mid-90's Marshall combo, the JTM 30 is an English made 12" 30 watt tube amp featuring two channels and spring reverb. The voicing is clean for a Marshall with nice top end and plenty of volume for small venues. The stock speaker has been replaced with a WGS Retro 30, which better suits my taste. Both that and the original Heritage G12 are included with this amp. I'll happily ship with either speaker installed, just let me know!
This is a real sleeper amp, and a bit of a departure from the classic driven Marshall tone -- some say it was Marshall's attempt to get into Deluxe Reverb territory. While it doesn't sound as bright and clean as a Fender, the voicing is definitely American-inspired with well-rounded Marshall low end. Keep the master volume on 4 or higher, and you can dial in anything from chime-y clean to rich tube overdrive on the Normal channel, or anywhere from 70's rock to hi-gain on Boost. Personally, I like to stick with the Normal channel and push the tubes with a drive pedal for more gain.
While the JTM 30 may be known for a few minor design flaws, they have all been addressed on this particular amp. A vent was installed above the board to avoid heat issues, and the tubes have been replaced with JJ 6L6GC's. These match the amp's circuit perfectly and run cooler than the stock 5881's.
The reverb tank on this model was also notoriously mounted on the wrong plane in a design oversight. Reverb tanks are intended to be mounted specifically on either a horizontal or vertical plane, which can be easily determined by the tank type code. As the stock tank was designed to be mounted on a vertical plane, the tank on this amp has been moved from the bottom of the cab to the back panel. The result is a much richer, more usable reverb than this amp model is typically known for.
Finally, this amp shows its age with a couple of small scrapes, some loose thread in the handle, and a nonoriginal reverb knob, all of which are clearly pictured. The footswitch is not included. Please reach out with any questions, and thanks for looking!
This is a real sleeper amp, and a bit of a departure from the classic driven Marshall tone -- some say it was Marshall's attempt to get into Deluxe Reverb territory. While it doesn't sound as bright and clean as a Fender, the voicing is definitely American-inspired with well-rounded Marshall low end. Keep the master volume on 4 or higher, and you can dial in anything from chime-y clean to rich tube overdrive on the Normal channel, or anywhere from 70's rock to hi-gain on Boost. Personally, I like to stick with the Normal channel and push the tubes with a drive pedal for more gain.
While the JTM 30 may be known for a few minor design flaws, they have all been addressed on this particular amp. A vent was installed above the board to avoid heat issues, and the tubes have been replaced with JJ 6L6GC's. These match the amp's circuit perfectly and run cooler than the stock 5881's.
The reverb tank on this model was also notoriously mounted on the wrong plane in a design oversight. Reverb tanks are intended to be mounted specifically on either a horizontal or vertical plane, which can be easily determined by the tank type code. As the stock tank was designed to be mounted on a vertical plane, the tank on this amp has been moved from the bottom of the cab to the back panel. The result is a much richer, more usable reverb than this amp model is typically known for.
Finally, this amp shows its age with a couple of small scrapes, some loose thread in the handle, and a nonoriginal reverb knob, all of which are clearly pictured. The footswitch is not included. Please reach out with any questions, and thanks for looking!
Reverb Buyer Protection
Reverb has your back if your item is lost, damaged, or doesn't match its description. Simply report any issues within 7 days and we'll help you get a full refund.Learn more about Reverb Buyer Protection.
| Listed | 9 years ago |
|---|---|
| Condition | Very Good (Used) Very Good items may show a few slight marks or scratches but are fully functional and in overall great shape.Learn more |
| Brand | |
| Model |
|
| Categories | |
| Year |
|
| Made In |
|
| Number of Inputs |
|
| Power Tube Type |
|
| Number of Channels |
|
| Built-In Effects |
|
| Speaker Configuration |
|
| Electronics |
|
| Color Family |
|
| Reverb |
|
| Output Power (Watts) |
|
Product safety information may be available here.


